With the Pi module made by AK-NORD, a subsequent connection of serial terminals to LAN, ISDN or Bluetooth problem. Offered in the device RS232/V24 or an internal RS485 interface. Only a small outlet of 64 x 20 mm is required to plug the Pi modules in the terminals. With two screws Pi modules are fixed and internally supplied with a voltage of 6-40 volts.
Power
6 - 40 Volt / 300 mA
Connections
1x RJ45 Ethernet 10/100Mbps
1x RS232 Serial 9pin connector
1x RS485 connector 2Pol
Dimensions
64 mm x 82 mm
Supported protocols
TCP / IP, UDP, FTP, SNMP, Telnet, ICMP, DHCP, DNS, DDNS, ARP, BOOTP, HTTP, IPP, LPR, DynDNS
Software Features
Modem - Emulation
- PAD emulation
ConnectOnData
AutoConnect
Serial Interface
RS232
Data bits: 8bit 7
Parity: Odd, Even, Mark, Space, None
Signals: TXD, RXD, RTS, CTS, DSR,
DTR, DCD, GND
RS485
Data bits: 8bit 7
Parity: Odd, Even, Mark, Space, None
Signals: RS485 +, RS485