| Features |
| Product colour | Green |
| Number of built-in relays | 1 |
| Number of modules | 1 |
| Ethernet LAN (RJ-45) ports | 1 |
| Weight & dimensions |
| Dimensions (WxDxH) | 146.2 x 60 x 1.6 mm |
The AEG relay card is an insert module for UPS systems of the PROTECT B., C., C.R, 1. and 1.M series. It enables communication via potential-free contacts and allows connection to external control or monitoring systems. The card is designed as a universally configurable switch, where the contacts can be set as either normally closed or normally open via jumpers. This allows flexible use depending on operational requirements. The signals are accessed via a 9-pin Sub-D interface, enabling integration into existing monitoring systems, for example in conjunction with an IBM AS400.
Relay card
The relay card is designed as an insert card and serves for signal transmission of UPS status messages. The contact assignment includes messages such as UPS fault (battery ≤ discharge cut-off voltage), general fault message, bypass activation, battery undervoltage, normal UPS operation, and mains failure followed by battery operation. These signals can be used to control alarm systems, log operational states, or trigger automatic responses to faults. The maximum contact rating is AC/DC ≤ 24 V / 0.5 A, which is sufficient for most monitoring and control applications.
Technology explained simply
The card operates with potential-free contacts, meaning it does not require its own power supply and can be directly integrated into existing control circuits. Configuration as normally closed or normally open is done via jumpers, allowing the card to be adapted to different requirements. The 9-pin Sub-D connector provides a standardized interface widely used in many industrial and IT environments. The card is designed for use in UPS systems requiring external status indication or control, for example in server rooms, critical IT infrastructures, or production environments.
Compatibility and accessories
The relay card is specifically developed for the UPS series PROTECT B., C., C.R, 1. and 1.M. Compatibility is guaranteed by the manufacturer. The card can be used in conjunction with corresponding UPS systems to forward status messages to external devices. The card is not intended for use in household surge protection devices of the PROTECT Basic series, as these have different functionality and design.
Mounting and installation
The relay card is installed as an insert module into the corresponding UPS device. Installation is done by inserting it into the designated socket of the UPS. Contact configuration is performed via jumpers, which are set or removed according to requirements. The 9-pin Sub-D connector enables easy connection to external control or monitoring systems. The card is designed for use in enclosed devices and requires no additional mounting aids.
Operational advantages
The relay card enables precise monitoring of UPS status, allowing faults to be detected and documented early. The flexible configuration as normally closed or normally open offers adaptation options for different control logics. The use of potential-free contacts reduces connection complexity and minimizes the risk of voltage spikes in the control circuit. The card is compact and integrates seamlessly into existing UPS systems, thereby increasing operational reliability.
Product color and dimensions
The relay card has a green product color and dimensions of 146.2 mm (width) × 60 mm (depth) × 1.6 mm (height). These dimensions correspond to the standard for insert modules in the mentioned UPS series. The card is lightweight and compact, allowing easy integration into devices. The specified dimensions are relevant for mounting and installation, as they take into account the space conditions inside the UPS housing.
Scope of delivery
The scope of delivery includes the relay card and a printed operating manual. The operating manual contains the necessary information for installation and configuration of the card.