Further information for ABB Automation GHQ4030001R0004 SWM4 water detector
General
Mounting method
Surface mounting
Height
40
Width
44
Depth
23
IFTTT support available
The ABB water detector SWM4 is an integrated sensor element for KNX-based home automation systems, used for early detection of water ingress in buildings. The device is fully encapsulated in casting resin, ensuring high mechanical stability and protection against environmental influences. It features gold-plated Termipoint pins, enabling reliable electrical connection within the KNX network. The supply voltage ranges from 4 to 20 volts, allowing flexible integration into various installation scenarios. Mounting is done as a surface-mounted device, with dimensions of 40 mm (height), 44 mm (width), and 23 mm (depth).
Applications
The water detector SWM4 is intended for monitoring areas where water damage can occur due to pipe bursts, groundwater ingress, wastewater overflow, or equipment failure (e.g. washing machines, dishwashers). It serves as an early warning system to detect damage at an early stage and thus avoid costly consequential damage. The application is in residential and commercial buildings where integrated building automation with KNX technology is used.
Functions and Equipment in Detail
The device detects the presence of water through electrical conductivity, measured via the gold-plated Termipoint pins. The casting resin encapsulation technique ensures that the device remains undamaged even when in contact with water, and protects the sensor elements from mechanical stress. The gold-plated contacts ensure durable and accurate signal transmission within the KNX network, even under difficult environmental conditions. The supply voltage of 4 to 20 V allows use in various networks supplied by different voltage sources.
Technology Explained Simply
The water detector SWM4 operates as a passive sensor integrated into a building control system via the KNX protocol. Upon detection of water, a signal is sent to the KNX network, which can be evaluated by a central control unit or user interface. The casting resin encapsulation protects the internal components from moisture, dust, and mechanical stress, ensuring high service life and reliability. The Termipoint pins are specifically designed for KNX installations and allow quick and secure mounting without additional tools.
Compatibility and Accessories
The water detector SWM4 is part of ABB’s KNX product range and is compatible with all KNX-compliant system components. It can be integrated into existing KNX installations to extend building automation with water protection functionality.
Mounting and Installation
Mounting is done as a surface-mounted device, with the unit directly fixed at the desired location in the room. The dimensions of 40 mm height, 44 mm width, and 23 mm depth allow placement in confined spaces or at typical installation points such as under washing machines, in basements, or along pipe lines. Installation is performed via the Termipoint pins, which are inserted into the corresponding sockets of the KNX installation.
Advantages in Operation
The water detector SWM4 provides reliable and early detection of water ingress, supporting damage prevention in buildings. The casting resin encapsulation ensures high robustness and longevity, while the gold-plated Termipoint pins guarantee stable signal transmission. Integration into KNX systems enables central monitoring and response, for example by triggering alarms or closing water supply lines. The simple mounting and compatibility with existing KNX installations reduce installation effort and maintenance costs.