ABB 61445412, EAN: 6410038068110

ABB Automation 61445412 NOCH0016-62 du/dt output filter IP22

Industrial Material > Engines and accessories

ABB Automation 61445412 NOCH0016-62 du/dt output filter IP22

Lieske Part No. 471259
Mfg Part No 61445412
EAN-Code 6410038068110
Manufacturer ABB
Here only 534,85 EUR
636,47 EUR incl. VAT

Further information for ABB Automation 61445412 NOCH0016-62 du/dt output filter IP22

General
Product typedu/dt output filter
ManufacturerABB
Degree of protectionIP22
Max. motor cable length150 m
CompatibilityACS400 series
The ABB du/dt output filter, type NOCH0016-62, is a filter module specifically developed for use with frequency converters to reduce vibrations in motor cables. It serves to limit the voltage rise rate dU/dt, thereby reducing the stress on motors with low insulation strength. This enables the operation of motors over longer cable lengths, with the maximum cable length specified as 150 meters. The device is intended for use with frequency converters from the ACS400 series and offers a protection rating of IP22, providing protection against solid foreign objects and splashing water to a limited extent. It is therefore suitable for use in indoor environments where there is no direct moisture or heavy dust accumulation.

Applications

The du/dt output filter is used in industrial plants where frequency converters are employed to drive electric motors. In particular, its use is beneficial in systems with long motor cables or motors with low insulation strength, helping to extend motor lifespan and prevent damage caused by high voltage rises. Typical applications are found in drive technology, for example in manufacturing, packaging technology, or conveyor systems.

Functions and Features in Detail

The filter reduces the high voltage rises caused by the rapid switching operations in frequency converters. These high dU/dt values can lead to insulation wear in the motor, especially with longer cables, where voltage peak reflections are intensified. The ABB filter dampens these effects, enabling the operation of motors that would otherwise not be suitable for use with frequency converters. The maximum cable length of 150 meters is achieved through the filter’s damping function, protecting signal integrity and motor insulation.

Technology Explained Simply

The term du/dt describes the change in voltage (U) per unit time (t), i.e., the voltage rise. Frequency converters generate very fast switching operations during voltage modulation, leading to high dU/dt values. These can reflect in the motor cable and cause voltage peaks that stress the motor’s insulation. The du/dt output filter acts as a choke, damping these high frequencies and thus limiting voltage rises. The IP22 protection rating ensures the device is protected against contact with solid objects larger than 12.5 mm and against splashing water in the vertical plane. It is therefore suitable for use in dry indoor environments.

Compatibility and Accessories

The filter is specifically developed for frequency converters from the ACS400 series by ABB. It is used in combination with these converters to meet requirements regarding motor insulation and cable length. Compatibility is limited to the ACS400 series, with no further specific model designations mentioned.

Mounting and Installation

Installation is carried out directly at the output of the frequency converter, between the converter and the motor. It is inserted into the circuit to dampen voltage rises in the motor cable. Installation does not require special tools or additional components, provided electrical connections are correctly executed. The IP22 protection rating requires mounting in a protected indoor area, avoiding direct moisture or heavy dust accumulation.

Operational Advantages

By reducing voltage rises, the lifespan of motors is extended, particularly in systems with long cables. The use of the filter enables the operation of motors with low insulation strength, which would otherwise not be suitable for use with frequency converters. Additionally, system stability is improved, as the risk of insulation failure and resulting downtime is reduced. The maximum cable length of 150 meters increases flexibility in system planning.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/471259
qrcode für ABB Automation 61445412 NOCH0016-62 du/dt output filter IP22