General
Mains voltage	480
Mains frequency	50/60 Hz
Number of phases input	Other
Number of phases output	3
Max. output frequency	598
Max. output voltage	480
Nominal output current I2N	50
Max. output at quadratic load at rated output voltage	22
Max. output at linear load at rated output voltage	22
Relative symmetric net frequency tolerance	5
Relative symmetric net voltage tolerance	10
Number of analogue outputs	1
Number of analogue inputs	2
Number of digital outputs	2
Number of digital inputs	4
Number of HW-interfaces industrial Ethernet	0
Number of interfaces PROFINET	0
Number of HW-interfaces RS-232	0
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	1
Number of HW-interfaces serial TTY	0
Number of HW-interfaces USB	0
Number of HW-interfaces parallel	0
Number of HW-interfaces other	1
Type of converter	U converter
Degree of protection (IP)	IP20
Degree of protection (NEMA)	Other
Height	240
Width	260
Depth	178.6
Power consumption	679
With control unit
Application in industrial area permitted
Application in domestic- and commercial area permitted
Supporting protocol for TCP/IP
Supporting protocol for PROFIBUS
Supporting protocol for CAN
Supporting protocol for INTERBUS
Supporting protocol for ASI
Supporting protocol for KNX
Supporting protocol for MODBUS
Supporting protocol for Data-Highway
Supporting protocol for DeviceNet
Supporting protocol for SUCONET
Supporting protocol for LON
Supporting protocol for PROFINET IO
Supporting protocol for PROFINET CBA
Supporting protocol for SERCOS
Supporting protocol for Foundation Fieldbus
Supporting protocol for EtherNet/IP
Supporting protocol for AS-Interface Safety at Work
Supporting protocol for DeviceNet Safety
Supporting protocol for INTERBUS-Safety
Supporting protocol for PROFIsafe
Supporting protocol for SafetyBUS p
Supporting protocol for BACnet
Supporting protocol for other bus systems
With optical interface
With PC connection
Integrated breaking resistance
4-quadrant operation possible

ACS180 - Frequency converter for mechanical engineering
for speed adjustment of asynchronous and permanent magnet motors
With icon-based integrated control panel,
EMV-C2 for 1x230 V, EMV-C3 for 3x380-480V, EMV-C4 for 3x230 V
Spring-loaded terminal for the control connections (2xAI, 1xAO, 4xDI, 1xDO, 1xRO, 1x RJ45 for Modbus RTU or external control panel/PC tool)
Adaptive programming (logic blocks)
Integrated brake chopper from size R2
Commissioning with the Drive Composer entry software (free of charge) or pro, connection via optional USB cable
Optional: mains choke, EMV-C1, DIN rail mounting (for R0.R2, integrated from R3)