Further information for ABB Automation ACH580-31-033A-4 frequency converter
General
Mains voltage
480
Mains frequency
50/60 Hz
Number of phases input
Other
Number of phases output
3
Max. output frequency
598
Max. output voltage
480
Nominal output current I2N
32
Max. output at quadratic load at rated output voltage
15
Max. output at linear load at rated output voltage
15
Relative symmetric net frequency tolerance
5
Relative symmetric net voltage tolerance
10
Number of analogue outputs
2
Number of analogue inputs
2
Number of digital outputs
3
Number of digital inputs
6
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
1
Number of HW-interfaces serial TTY
0
Number of HW-interfaces USB
1
Number of HW-interfaces parallel
2
Number of HW-interfaces other
2
Type of converter
U converter
Degree of protection (IP)
IP21
Degree of protection (NEMA)
1
Height
771
Width
252
Depth
392
Power consumption
629
With control unit
Application in industrial area permitted
Application in domestic- and commercial area permitted
Supporting protocol for TCP/IP
Supporting protocol for PROFIBUS
Supporting protocol for CAN
Supporting protocol for INTERBUS
Supporting protocol for ASI
Supporting protocol for KNX
Supporting protocol for MODBUS
Supporting protocol for Data-Highway
Supporting protocol for DeviceNet
Supporting protocol for SUCONET
Supporting protocol for LON
Supporting protocol for PROFINET IO
Supporting protocol for PROFINET CBA
Supporting protocol for SERCOS
Supporting protocol for Foundation Fieldbus
Supporting protocol for EtherNet/IP
Supporting protocol for AS-Interface Safety at Work
Supporting protocol for DeviceNet Safety
Supporting protocol for INTERBUS-Safety
Supporting protocol for PROFIsafe
Supporting protocol for SafetyBUS p
Supporting protocol for BACnet
Supporting protocol for other bus systems
With optical interface
With PC connection
Integrated breaking resistance
4-quadrant operation possible
Frequenzumrichter zur Klimaregelung, ACH580-31 mit spezieller Filterung zur Reduzierung von Oberwellen (Ultra Low Harmonic Drive)
Zuverlässige Klimaregelung und benutzerfreundlicher Betrieb mit Frequenzumrichtern, die es Ihnen ermöglichen, sich auf das Wesentliche zu konzentrieren
Die nächste Entwicklungsstufe der Klimaregelung setzt neue Standards bei Einfachheit und Zuverlässigkeit. Die neue, entscheidende Komponente in HLK-Systemen ermöglicht erhebliche Energieeinsparungen. Sie kann jeden Motor regeln. Die Kommunikation erfolgt in den Sprachen, die Sie und Ihr System bereits kennen. Die Spezifikationen bei unternehmenskritischen Anwendungen werden übertroffen. In Gewerbegebäuden wird die Produktivität durch einen größeren Komfort erhöht. Und was ist das Beste daran? Sie brauchen ihn nur zu installieren und können sich auf ihre Aufgaben konzentrieren. Diese Baureihe erreicht durch Ihre integrierte Filterung einen THDi von <,5% und kann idealerweise ohne große Maßnahmen auch in schwachen Netzen eingesetzt werden