ABB 3AUA0000080509, EAN: 6438177305651

ABB Automation ACS580-01-363A-4 frequency converter 200kW

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation ACS580-01-363A-4 frequency converter 200kW

Lieske Part No. 1334947
Mfg Part No 3AUA0000080509
EAN-Code 6438177305651
Manufacturer ABB
Here only 20.815,45 EUR
24.770,39 EUR incl. VAT

Further information for ABB Automation ACS580-01-363A-4 frequency converter 200kW

General
Mains voltage480
Mains frequency50/60 Hz
Number of phases inputOther
Number of phases output3
Max. output frequency598
Max. output voltage480
Nominal output current I2N363
Max. output at quadratic load at rated output voltage200
Max. output at linear load at rated output voltage200
Relative symmetric net frequency tolerance5
Relative symmetric net voltage tolerance10
Number of analogue outputs2
Number of analogue inputs2
Number of digital outputs3
Number of digital inputs6
Number of HW-interfaces industrial Ethernet0
Number of interfaces PROFINET0
Number of HW-interfaces RS-2320
Number of HW-interfaces RS-4220
Number of HW-interfaces RS-4851
Number of HW-interfaces serial TTY0
Number of HW-interfaces USB1
Number of HW-interfaces parallel2
Number of HW-interfaces other2
Type of converterU converter
Degree of protection (IP)IP21
Degree of protection (NEMA)1
Height955
Width380
Depth418
Power consumption4839
With control unityes
Application in industrial area permittedyes
Application in domestic- and commercial area permittedyes
Supporting protocol for TCP/IPyes
Supporting protocol for PROFIBUSyes
Supporting protocol for CANyes
Supporting protocol for INTERBUSno
Supporting protocol for ASIno
Supporting protocol for KNXno
Supporting protocol for MODBUSyes
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNetyes
Supporting protocol for SUCONETno
Supporting protocol for LONno
Supporting protocol for PROFINET IOyes
Supporting protocol for PROFINET CBAno
Supporting protocol for SERCOSno
Supporting protocol for Foundation Fieldbusno
Supporting protocol for EtherNet/IPyes
Supporting protocol for AS-Interface Safety at Workno
Supporting protocol for DeviceNet Safetyyes
Supporting protocol for INTERBUS-Safetyno
Supporting protocol for PROFIsafeno
Supporting protocol for SafetyBUS pno
Supporting protocol for BACnetno
Supporting protocol for other bus systemsyes
With optical interfaceno
With PC connectionyes
Integrated breaking resistanceno
4-quadrant operation possibleno
The ACS580-01-363A-4 frequency converter from ABB is a U-inverter designed for industrial applications and intended for wall mounting. It enables precise control of electric motors in systems with variable or constant torque requirements, such as in pumps, fans, conveyor systems, or mixers. The devices are designed for operating voltages between 380 and 480 volts and operate at a network frequency of 50/60 Hz. The maximum output voltage is 480 volts, and the maximum output frequency is 598 Hz. The rated output current is 363 amperes, with the maximum delivered power being 200 kilowatts under both quadratic and linear loading. The devices are approved for use in industrial environments as well as in residential and commercial applications.

Applications

The frequency converter is suitable for a wide range of industrial applications, particularly in systems requiring variable speed control. It is ideal for drives in conveyor technology, pump and fan technology, as well as in mixing and stirring systems. The integrated functions allow for easy commissioning and setup without additional hardware. The devices are designed for an operating voltage of 380 to 480 volts, making them suitable for standard power networks in many industrial countries.

Functions and Equipment in Detail

The inverter features six digital inputs and three digital outputs, two analog inputs and two analog outputs. The interfaces include a serial RS-485 interface, a USB connection, and two parallel interfaces. Additionally, a PC connection is integrated, enabling communication with control systems and commissioning via external devices. The devices support multiple industrial communication protocols, including TCP/IP, PROFIBUS, CAN, MODBUS, DeviceNet, PROFINET IO, and EtherNet/IP. Support for PROFINET IO allows integration into modern fieldbus systems. The devices are equipped with an operator interface enabling local control and parameterization.

Technology Explained Simply

The frequency converter converts fixed mains voltage into variable voltage and frequency to adjust the speed of the connected motor. The protection class IP21 protects against contact with fingers and vertically falling drops, making it suitable for indoor use. The NEMA 1 protection class corresponds to a similar protection rating for indoor installations. The relative symmetrical mains voltage tolerance is 10 %, and the mains frequency tolerance is 5 %, allowing flexible adaptation to slight fluctuations in the power supply network. The power consumption is 4839 watts. The devices are not designed for four-quadrant operation, and an integrated brake chopper is not included.

Compatibility and Accessories

Compatible accessories include, among others, the M22-R10K potentiometer (10 kOhm), the PROFIBUS DP adapter FPBA-01, the CMOD-01 option card with RO + 1x DO, the DPMP-02 door mounting kit, the DeviceNet adapter FDNA-01, the CANOpen adapter FCAN-01, the EtherCAT adapter FECA-01, and the Panel-Bus adapter CDPI-01. These components extend the functionality of the inverter, for example by adding additional interfaces or control options. The DriveComposer Pro software (DCPT-01) is used for commissioning and parameterization, particularly for the ACS880 series, but can also be used to configure the ACS580.

Mounting and Installation

The frequency converter is designed for wall mounting. Dimensions are 955 mm height, 380 mm width, and 418 mm depth. Mounting is performed on a flat, load-bearing wall surface, taking into account ambient temperature and air circulation. The device’s connection readiness allows for quick integration into existing systems. The integrated interfaces and protocol support facilitate connection to higher-level control systems.

Operational Advantages

The standard integration of essential functions reduces the need for additional hardware and simplifies selection and installation. Support for multiple industrial protocols enables flexible integration into existing automation systems. Easy commissioning and setup via the integrated operator interface and external devices through the PC connection increase efficiency during maintenance and parameterization. The devices are designed for use in industrial and commercial environments, with protection class IP21 ensuring suitability for indoor applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1334947
qrcode für ABB Automation ACS580-01-363A-4 frequency converter 200kW