Further information for ABB Automation ACS580-01-206A-4 frequency converter
General
Mains voltage
480
Mains frequency
50/60 Hz
Number of phases input
Other
Number of phases output
3
Max. output frequency
598
Max. output voltage
480
Nominal output current I2N
206
Max. output at quadratic load at rated output voltage
110
Max. output at linear load at rated output voltage
110
Relative symmetric net frequency tolerance
5
Relative symmetric net voltage tolerance
10
Number of analogue outputs
2
Number of analogue inputs
2
Number of digital outputs
3
Number of digital inputs
6
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
1
Number of HW-interfaces serial TTY
0
Number of HW-interfaces USB
1
Number of HW-interfaces parallel
2
Number of HW-interfaces other
2
Type of converter
U converter
Degree of protection (IP)
IP21
Degree of protection (NEMA)
1
Height
880
Width
284
Depth
370
Power consumption
2785
With control unit
Application in industrial area permitted
Application in domestic- and commercial area permitted
Supporting protocol for TCP/IP
Supporting protocol for PROFIBUS
Supporting protocol for CAN
Supporting protocol for INTERBUS
Supporting protocol for ASI
Supporting protocol for KNX
Supporting protocol for MODBUS
Supporting protocol for Data-Highway
Supporting protocol for DeviceNet
Supporting protocol for SUCONET
Supporting protocol for LON
Supporting protocol for PROFINET IO
Supporting protocol for PROFINET CBA
Supporting protocol for SERCOS
Supporting protocol for Foundation Fieldbus
Supporting protocol for EtherNet/IP
Supporting protocol for AS-Interface Safety at Work
Supporting protocol for DeviceNet Safety
Supporting protocol for INTERBUS-Safety
Supporting protocol for PROFIsafe
Supporting protocol for SafetyBUS p
Supporting protocol for BACnet
Supporting protocol for other bus systems
With optical interface
With PC connection
Integrated breaking resistance
4-quadrant operation possible
The ACS580-01-206A-4 frequency converter from ABB is a VVVF converter for wall mounting, suitable for industrial and commercial applications. It is designed for supply voltages of 480 V at a frequency of 50/60 Hz and delivers a maximum output voltage of 480 V with a maximum output frequency of 598 Hz. The rated output power is 110 kW for both quadratic and linear loads, with a rated output current I2N of 206 A. The protection rating IP21 and NEMA protection class 1 indicate suitability for indoor use, where the converter is protected against finger contact but not against splashing water or dust. The maximum power consumption is 2785 W.
Applications
This frequency converter is approved for use in industrial, residential, and commercial environments. It is suitable for controlling pumps, fans, conveyors, mixers, and other drives requiring either variable or constant torque. The standard integration of essential functions enables simple commissioning and setup without additional hardware.
Functions and Equipment in Detail
The converter features six digital inputs and three digital outputs, two analog inputs and two analog outputs. Interfaces include a serial RS-485 interface, a USB interface, and two parallel interfaces. Additionally, a PC connection is integrated, facilitating communication with control systems and software-based commissioning. Support for protocols such as TCP/IP, PROFIBUS, CAN, MODBUS, DeviceNet, PROFINET IO, and EtherNet/IP enables flexible integration into existing automation systems. The relative symmetrical supply frequency tolerance is 5 %, and the supply voltage tolerance is 10 %, ensuring stable operation under slightly fluctuating supply conditions.
Technology Explained Simply
As a VVVF converter, the device converts the alternating voltage from the supply into a variable alternating voltage to precisely control the speed and torque of connected motors. The maximum output frequency of 598 Hz enables high-speed regulation, while the output voltage of 480 V meets motor supply requirements. The integrated control interface allows local control and display of operating parameters. The converter does not operate in four-quadrant mode, meaning it does not support regenerative braking. An integrated brake chopper is not included.
Compatibility and Accessories
Various accessories are available to extend functionality, including adapters for EtherCAT, CANOpen, DeviceNet, and PROFIBUS DP. Control panel door mounting kits such as DPMP-01 or DPMP-02, as well as software solutions like DriveComposer Pro for commissioning, are also available. Additionally, potentiometers and option cards with PTC interfaces or additional digital inputs are offered. The mentioned accessories are designed for integration into existing systems, with compatibility specifically matched to the respective models of the ACS580 series.
Mounting and Installation
The frequency converter is designed for wall mounting and is installed indoors. Dimensions are 880 mm (height), 284 mm (width), and 370 mm (depth). Installation is carried out using the designated mounting surfaces, with electrical connections made according to the technical specifications in the manufacturer’s manual. The integrated control interface allows direct on-site operation.
Operational Advantages
The standard inclusion of essential functions reduces the need for additional modules and simplifies selection and commissioning. Support for numerous industrial communication protocols enables flexible integration into existing control systems. High output power and stable supply voltage tolerance ensure reliable operation under variable supply conditions. The integrated control interface provides direct display and control of operating parameters, simplifying maintenance and diagnostics.