ABB 3AUA0000080504, EAN: 6438177305606

ABB Automation ACS580-01-145A-4 frequency converter 75kW

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation ACS580-01-145A-4 frequency converter 75kW

Lieske Part No. 1334951
Mfg Part No 3AUA0000080504
EAN-Code 6438177305606
Manufacturer ABB
Here only 7.996,15 EUR
9.515,42 EUR incl. VAT

Further information for ABB Automation ACS580-01-145A-4 frequency converter 75kW

General
Mains voltage480
Mains frequency50/60 Hz
Number of phases inputOther
Number of phases output3
Max. output frequency598
Max. output voltage480
Nominal output current I2N145
Max. output at quadratic load at rated output voltage75
Max. output at linear load at rated output voltage75
Relative symmetric net frequency tolerance5
Relative symmetric net voltage tolerance10
Number of analogue outputs2
Number of analogue inputs2
Number of digital outputs3
Number of digital inputs6
Number of HW-interfaces industrial Ethernet0
Number of interfaces PROFINET0
Number of HW-interfaces RS-2320
Number of HW-interfaces RS-4220
Number of HW-interfaces RS-4851
Number of HW-interfaces serial TTY0
Number of HW-interfaces USB1
Number of HW-interfaces parallel2
Number of HW-interfaces other2
Type of converterU converter
Degree of protection (IP)IP21
Degree of protection (NEMA)1
Height727
Width252
Depth369
Power consumption1960
With control unityes
Application in industrial area permittedyes
Application in domestic- and commercial area permittedyes
Supporting protocol for TCP/IPyes
Supporting protocol for PROFIBUSyes
Supporting protocol for CANyes
Supporting protocol for INTERBUSno
Supporting protocol for ASIno
Supporting protocol for KNXno
Supporting protocol for MODBUSyes
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNetyes
Supporting protocol for SUCONETno
Supporting protocol for LONno
Supporting protocol for PROFINET IOyes
Supporting protocol for PROFINET CBAno
Supporting protocol for SERCOSno
Supporting protocol for Foundation Fieldbusno
Supporting protocol for EtherNet/IPyes
Supporting protocol for AS-Interface Safety at Workno
Supporting protocol for DeviceNet Safetyyes
Supporting protocol for INTERBUS-Safetyno
Supporting protocol for PROFIsafeno
Supporting protocol for SafetyBUS pno
Supporting protocol for BACnetno
Supporting protocol for other bus systemsyes
With optical interfaceno
With PC connectionyes
Integrated breaking resistanceno
4-quadrant operation possibleno
The ACS580-01-145A-4 frequency converter from ABB is a U-inverter designed for industrial applications and intended for wall mounting. It is used for controlling electric motors in systems requiring variable or constant torque, such as pumps, fans, conveyors, or mixers. The unit is designed for supply voltages in the range of 380 to 480 V and a supply frequency of 50/60 Hz. The maximum output voltage is 480 V, and the maximum output frequency is 598 Hz. The rated output current is 145 A, with the maximum delivered power being 75 kW under both quadratic and linear loading. The protection rating IP21 and NEMA protection class 1 indicate indoor use, providing protection against finger contact but not against dust or splashing water. The power consumption is 1960 W.

Applications
This frequency converter is approved for use in industrial, residential, and commercial environments. It is particularly suitable for applications requiring precise speed control, such as in conveyor systems, process engineering, or building automation. The standard integration of essential functions enables easy commissioning without additional hardware. The unit is ready for connection and can be directly integrated into existing systems.

Functions and Equipment in Detail
The ACS580-01-145A-4 features an integrated control unit enabling local operation and adjustment. It provides two analog inputs and two analog outputs, as well as six digital inputs and three digital outputs. The relative symmetrical supply frequency tolerance is 5 %, and the relative symmetrical supply voltage tolerance is 10 %, allowing flexible adaptation to minor fluctuations in the power supply network. The unit supports various industrial communication protocols, including TCP/IP, PROFIBUS, CAN, MODBUS, DeviceNet, PROFINET IO, and EtherNet/IP. Additionally, it includes a serial interface RS-485 and a USB interface. The number of parallel interfaces is two, and there are two further interfaces in the category other. A PC connection is also integrated.

Technology Explained Simply
As a U-inverter, the device converts the alternating voltage from the power supply into a variable alternating voltage applied to the electric motor. This allows the motor speed to be continuously regulated. The maximum output frequency of 598 Hz enables high-speed control, while the maximum output voltage of 480 V meets motor supply requirements. The integrated interfaces and protocol support allow flexible integration into existing automation systems. The IP21 protection rating protects against finger contact but is not suitable for outdoor use or environments exposed to dust and splashing water.

Compatibility and Accessories
Compatible accessories include adapters such as the CDPI-01 PANEL BUS Panel-Bus Adapter, the FPBA-01 Profibus DP Adapter, the FECA-01 EtherCAT Adapter, the FDNA-01 DeviceNet Adapter, the FCAN-01 CANOpen Adapter, and the DPMP-02 Control Panel Door Mounting Kit. Additional options include an option card with external 24 V AC/DC PTC interface, an option card with RO + 1x DO, the DPMP-EXT Door Mounting Kit for control panel DPMP-02 and CDPI-01, and the software tool DCPT-01 DriveComposer Pro for commissioning. Potentiometers such as the M22-R10K or the 3SU1200-2PS10-1AA0 can be used for analog adjustment. The mentioned accessories extend the functionality and mounting options of the frequency converter.

Mounting and Installation
The frequency converter is designed for wall mounting. Dimensions are 727 mm (height), 252 mm (width), and 369 mm (depth). Installation is carried out indoors, with the IP21 protection rating requiring use in dry environments. The unit is ready for connection, allowing electrical connections to be made directly after installation. The integrated interfaces and control unit simplify commissioning and configuration.

Operational Advantages
The standard integration of functions and support for numerous industrial protocols reduces the need for additional hardware. The easy commissioning and ready-to-connect design shorten installation time. The high communication flexibility enables integration into various automation environments. The maximum power of 75 kW and rated output current of 145 A cover a wide range of applications. The unit is suitable for use in industrial and commercial environments, with the IP21 protection rating specifying use in dry indoor areas.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1334951
qrcode für ABB Automation ACS580-01-145A-4 frequency converter 75kW