ABB 2TLA010052R0400, EAN: 7350024483321

ABB Automation 2TLA010052R0400 Sentry SSR32 safety relay 24 V DC

Industrial Material > Industrial relays and contactors > Safety relay

ABB Automation 2TLA010052R0400 Sentry SSR32 safety relay 24 V DC

Lieske Part No. 1950300
Mfg Part No 2TLA010052R0400
EAN-Code 7350024483321
Manufacturer ABB
Here only 401,85 EUR
478,20 EUR incl. VAT

Further information for ABB Automation 2TLA010052R0400 Sentry SSR32 safety relay 24 V DC

General
ModelOther
Type of electric connectionScrew connection
Evaluation inputsOne- and two-channel
Release-delay20
Number of outputs, safety related, undelayed, with contact2
Number of outputs, safety related, delayed, with contact2
Number of outputs, safety related, undelayed, semiconductors0
Number of outputs, safety related, delayed, semiconductors0
Number of outputs, signalling function, undelayed, with contact0
Number of outputs, signalling function, delayed, with contact0
Number of outputs, signalling function, undelayed, semiconductors0
Number of outputs, signalling function, delayed, semiconductors0
Type of safety acc. IEC 61496-14
Stop category acc. IEC 602040 + 1
Performance level acc. EN ISO 13849-1Level e
SIL according to IEC 615083
Width22.5
Height120
Depth120
Control voltage 124
Control voltage 224
Operating voltage at DC24
Power consumption6
Rated switch current3
Supply voltage DC24
Type of control voltage 1DC
Type of control voltage 2DC
Voltage type (operating voltage)DC
Voltage type of supply voltageDC
Suitable for monitoring of position switchesyes
Suitable for monitoring of emergency-stop circuitsyes
Suitable for monitoring of valvesyes
Suitable for monitoring of optoelectronic protection equipmentyes
Suitable for monitoring of tactile sensorsno
Suitable for monitoring of magnetic switchesyes
Suitable for monitoring of proximity switchesyes
Rail mounting possibleyes
With detachable clampsyes
With start inputyes
With muting functionno
With feedback circuityes
With approval for BG BIAno
With approval according to ULyes
The ABB safety relay Sentry SSR32 is an industrial-grade relay for monitoring and safeguarding machine and plant functions. It is used for the safe disconnection of drives or power supplies upon detection of hazardous situations, for example, due to defective position switches, emergency stop circuits, valves, optoelectronic safety devices, or proximity switches. The device is designed for use in safety-critical applications and meets the requirements for safety functions according to international standards. It features an operating voltage of 24 V DC and is designed for mounting on support rails, enabling easy integration into standardized enclosures.

Applications

The safety relay Sentry SSR32 is suitable for monitoring various input signals in industrial plants. This includes, for example, position switches that monitor the status of machine parts, or emergency stop circuits that are activated during emergency shutdowns. It can also be used for monitoring valves and proximity switches, which react, for example, when approaching hazardous areas. Monitoring of magnetic switches and optoelectronic safety devices enables integration into modern safety concepts. The series is not designed for monitoring tactile sensors.

Functions and Equipment in Detail

The relay features two safety-oriented, non-delayed, contact-based outputs and two safety-oriented, delayed, contact-based outputs. The reset delay is 20 milliseconds, enabling controlled shutdown. Input evaluation is performed in single- and dual-channel mode, increasing the reliability of signal monitoring. An integrated start input controls machine startup. The feedback circuit function ensures that outputs are only activated when all inputs correctly signal. The device is equipped with removable terminals, enabling flexible and secure wiring.

Technology Explained Simply

The safety relay operates with a supply voltage of 24 V DC and consumes 6 VA. The control voltages for the inputs are also 24 V DC. The outputs are contact-based, meaning they use mechanical contacts to perform switching operations. This design is robust and suitable for industrial environments. Power consumption is low, minimizing heat generation and enhancing operational safety. The reset delay of 20 ms ensures that outputs do not immediately deactivate after a fault condition, but remain active briefly to avoid false alarms.

Compatibility and Accessories

The relay is designed for mounting on support rails and can therefore be integrated into standard enclosures. It features a Multi-Reset function, allowing up to 10 Sentry safety relays to be reset using a single reset button. This simplifies reactivation after a safety trigger. The Sentry series includes various models, including basic models (BSR), single-function models (SSR), safety timers (TSR), and universal models (USR), which can be selected according to application requirements. The SSR models are specifically designed for monitoring contacts and OSSD signals, as well as for two-hand control operations.

Mounting and Installation

Mounting is done on a support rail, with device dimensions of 22.5 mm (width) × 120 mm (height) × 120 mm (depth). Screw terminals enable secure and reliable connection of cables. Removable terminals facilitate installation and maintenance. The front of the relay features a switch to select between manual and automatic reset. Installation is carried out according to the requirements of the relevant standards and safety specifications.

Advantages in Operation

The safety relay Sentry SSR32 offers high reliability through single- and dual-channel input evaluation. The integrated feedback circuit function increases safety, as outputs are only activated when signal monitoring is correct. The 20 ms reset delay prevents unwanted shutdowns. The Multi-Reset function reduces maintenance effort, as multiple relays can be reset with a single button. The use of contact-based outputs ensures a robust and long-lasting switching function. The device meets the requirements for Safety Type 4 according to IEC 61496-1, Stop Category 0 + 1 according to IEC 60204, Performance Level e according to EN ISO 13849-1, and SIL 3 according to IEC 61508. It is also certified according to UL, ensuring international usability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1950300
qrcode für ABB Automation 2TLA010052R0400 Sentry SSR32 safety relay 24 V DC