ABB 2CTB803973R1600, EAN: 3660308520692

ABB Automation 2CTB803973R1600 OVR T2-T3 3N 20-275 P TS QS surge protection

Energy > Surge Protection

ABB Automation 2CTB803973R1600 OVR T2-T3 3N 20-275 P TS QS surge protection

Lieske Part No. 1328607
Mfg Part No 2CTB803973R1600
EAN-Code 3660308520692
Manufacturer ABB
Here only 431,30 EUR
513,25 EUR incl. VAT

Further information for ABB Automation 2CTB803973R1600 OVR T2-T3 3N 20-275 P TS QS surge protection

General
Number of conductors (without earthing)4
Nominal discharge surge current (8/20)5
Nominal voltage AC400
Short-circuit breaking capacity (Isccr)100
Max. continuous voltage AC275
Max. discharge surge current (8/20)5
Mounting methodOther
Construction size4 modular spacing
Voltage protection level1.5
Max. conductor cross section solid (solid, stranded)25
Max. conductor cross section flexible (fine-strand)16
Voltage protection level L-N1.4
Voltage protection level N-PE1.4
Signalling at the deviceOptic
Degree of protection (IP)IP20
System configuration DCno
System configuration ITno
System configuration TNyes
System configuration TN-Cno
System configuration TN-C-Syes
System configuration TN-Syes
System configuration TTyes
System configuration otherno
With remote signalling contactyes
Integrated backup fuseno
Category type 2yes
ABB surge protection device type OVR T2-T3 3N 20-275 P TS QS is a protection device for electrical low-voltage installations, protecting against dangerous overvoltages. It is an SPD (Surge Protective Device) of combination type 2+3, tested according to DIN EN 61643-11 and meeting the requirements of DIN VDE 0100-443 and -534. The device is designed for networks with the network configurations TN, TN-C-S, TN-S and TT, thus protecting in various connection configurations. It is rated for a nominal voltage of 400 V AC and can withstand a maximum voltage of 275 V AC continuously. The protection device is designed for use in electrical installations with 4 conductors (without earth), indicating a three-phase supply with neutral conductor.

Applications
The protection device is intended for use in low-voltage installations, particularly in buildings with electrical consumers that need protection against transient overvoltages. It is suitable for protecting end devices such as lighting, heating, electrical appliances or IT systems from damage caused by lightning strikes or network disturbances. Compatibility with the System pro M compact series enables integrated mounting in distribution boxes, with devices being stackable on phase rails. This simplifies installation and maintenance in existing installations.

Functions and Equipment in Detail
The device features optical signalling to indicate the operating status. The function indicator allows visual inspection of the protection status, which is helpful during maintenance or inspections. An alarm contact is integrated, enabling the device status to be monitored via an external control system or alarm system. The protection device is equipped with QuickSafe® technology, enabling safe and quick mounting and maintenance. The maximum discharge capacity is 5 kA (8/20 µs), with a protection level of 1.5 kV. For connection to conductors, a maximum rigid conductor cross-section of 25 mm² and a flexible (fine-stranded) cross-section of 16 mm² are permitted.

Technology Explained Simply
The protection device operates as an overvoltage protection device that automatically limits voltage to a safe level when overvoltages occur in the network. When the protection level of 1.5 kV is reached, the overvoltage current is diverted to protect connected devices. The test class type 2 means the device is suitable for use in main distribution boards or distribution boards with high energy input. The protection levels L-N and N-PE are each 1.4 kV, ensuring effective protection between conductors and between neutral conductor and protective conductor. The short-circuit withstand capability (Isccr) is 100 kA, indicating the device’s ability to withstand a short-circuit current of up to 100 kA for a short time without failure.

Compatibility and Accessories
The protection device is compatible with the System pro M compact series and can be mounted stackably on phase rails. This enables modular expansion of the protection system and easy integration into existing distribution boards. The devices are designed for use in electrical installations with network configurations TN, TN-C-S, TN-S and TT, enabling broad applicability in various building types and supply structures. QuickSafe® technology supports safe mounting and maintenance, making installation more efficient.

Mounting and Installation
Mounting is carried out in a distribution box, with the device being stackable on phase rails. The module size is 4 TE, allowing placement in standard distribution boxes. The maximum conductor cross-section dimensions of 25 mm² (rigid) and 16 mm² (flexible) allow connection to various cable types. The protection rating IP20 means the device is protected against contact with fingers and against solid foreign objects, but not against water or dust. It is therefore intended for indoor use.

Advantages in Operation
The integrated optical signalling and alarm contact enable continuous monitoring of the protection status. QuickSafe® technology reduces mounting time and increases safety during installation. The high short-circuit withstand capability of 100 kA ensures reliable operation even under high current loads. Compatibility with the System pro M compact series simplifies integration into existing installations and enables modular expansion. The protection device is thus suitable for use in industrial, commercial and residential buildings where a reliable overvoltage protection solution is required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1328607
qrcode für ABB Automation 2CTB803973R1600 OVR T2-T3 3N 20-275 P TS QS surge protection