The ABB surge protection device type OVR T2-T3 3N 20-275 P QS is a protection device for electrical low-voltage installations, designed to divert overvoltages in the range of 20 to 275 V AC. The device is intended for use in networks of the types TN, TN-C-S, TN-S and TT, protecting electrical installations and connected end devices against dangerous voltage spikes. The protection device complies with the requirements of DIN EN 61643-11 and meets the specifications of DIN VDE 0100-443 and 534. It is equipped with QuickSafe® technology, enabling safe and quick installation.
Applications
This device is intended for use in industrial and commercial electrical installations, particularly in systems with a 3-phase network and a neutral conductor (3P+N). It protects the installation against transient overvoltages caused by lightning strikes, switching operations or other electrical disturbances. The protection device is suitable for installations with a nominal voltage of 400 V AC and a maximum continuous voltage of 275 V AC. Installation is carried out in switchboards, with a module size of 4 TE.
Functions and Equipment in Detail
The surge protection device provides a nominal discharge current of 5 kA (8/20 µs), making it suitable for diverting high-energy impulses. The protection level is 1.4 kV for the line-to-earth connection (L-PE) and 1.8 kV for the line-to-neutral connection (L-N). Signaling is optical, allowing the operational status of the device to be visually checked. The unit is not equipped with a remote signaling contact or an integrated fuse.
Technology Explained Simply
The QuickSafe® technology enables quick and secure installation of the protection device in switchboards. The devices can be mounted on phase rails with the System pro M compact series, allowing modular expansion of the switchgear. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust. The device is intended for indoor use.
Compatibility and Accessories
The protection device is compatible with the System pro M compact series and can be mounted on phase rails together with other devices from this series. Installation is carried out in switchboards, taking into account the module size of 4 TE.
Mounting and Installation
Installation is carried out in switchboards using QuickSafe® technology, which enables secure and fast fixation. The unit is designed for a maximum conductor cross-section of 25 mm² (rigid, single- or multi-strand) and 16 mm² (flexible, fine-stranded). The short-circuit withstand capability is 100 kA, ensuring safety in the event of short-circuit incidents. Installation is carried out in accordance with the requirements of DIN VDE 0100-443 and 534.
Advantages in Operation
The optical signaling allows for easy checking of the operational status. QuickSafe® technology reduces installation time and increases safety during installation. The protection device is suitable for use in various network configurations (TN, TN-C-S, TN-S, TT), enabling flexible application in different installation setups. The Type 2 test class is intended for diverting overvoltages in the main distribution board, thereby increasing the safety of the entire installation.