ABB 2CTB803973R1100, EAN: 3660308519931

ABB 2CTB803973R1100 Surge Arrester T2 3N

Energy > Surge Protection

ABB 2CTB803973R1100 Surge Arrester T2 3N

Lieske Part No. 614233
Mfg Part No 2CTB803973R1100
EAN-Code 3660308519931
Manufacturer ABB
Here only 361,00 EUR
429,59 EUR incl. VAT

Further information for ABB 2CTB803973R1100 Surge Arrester T2 3N

General
Number of conductors (without earthing)4
Nominal discharge surge current (8/20)20
Nominal voltage AC230
Short-circuit breaking capacity (Isccr)100
Max. continuous voltage AC275
Max. discharge surge current (8/20)20
Mounting methodOther
Construction size4 modular spacing
Voltage protection level1.5
Max. conductor cross section solid (solid, stranded)25
Max. conductor cross section flexible (fine-strand)16
Voltage protection level L-N1.25
Voltage protection level N-PE1.4
Signalling at the deviceOptic
Degree of protection (IP)IP20
System configuration DCno
System configuration ITno
System configuration TNyes
System configuration TN-Cno
System configuration TN-C-Syes
System configuration TN-Syes
System configuration TTyes
System configuration otherno
With remote signalling contactno
Integrated backup fuseno
Category type 2yes
The OVR T2 3N 40-275 P QS surge protection device from ABB is a protection device of Type Class 2 (SPD Type 2) for electrical installations in the low-voltage range. It is designed to protect against indirect lightning effects and switching overvoltages and should be installed as close as possible to the supply point of the installation. The device is designed for network configurations TT, TN-S and TN-C-S and is particularly suitable for applications in sub-distributions and final circuits. The protection device consists of a base unit and a replaceable protection module, ensuring simple maintenance and replaceability.

Applications

The OVR T2 3N 40-275 P QS is designed for use in electrical installations with a nominal voltage of 230 V AC and a maximum voltage up to 275 V AC. It is suitable for three-phase systems with a neutral conductor (3N) and is used in distributions where high reliability of power supply is required. The protection device is particularly suitable for installations in the field of building electrotechnics, such as residential and commercial buildings, where overvoltages can occur due to network switching operations or atmospheric discharges.

Functions and Equipment in Detail

The device features a mechanical function indicator that optically signals the operating status. The thermal monitoring QuickSafe® ensures that in case of overload or malfunction, a safe disconnection is carried out. The protection level is 1.5 kV, with the protection level between conductor and neutral conductor (L-N) at 1.25 kV and between neutral conductor and protective earth (N-PE) at 1.4 kV. These values ensure effective protection of connected devices against transient overvoltages.

Technology Explained Simply

The nominal discharge current is 20 kA (8/20 µs), meaning the device is capable of safely diverting short, high current surges. The short-circuit withstand capability (Isccr) is 100 kA, describing the device's ability to withstand a short-circuit in the network without damage. The maximum conductor cross-section is 25 mm² for rigid and 16 mm² for flexible conductors, enabling flexible integration into existing installations. The protection rating IP20 protects against finger contact and solid foreign objects, but not against water or dust – therefore, the device is intended for indoor use only.

Compatibility and Accessories

The device is compatible with the System pro M compact series and can be mounted on phase rails. This enables modular expansion of the distribution and easy integration into existing switchgear. The mounting size is 4 TE, allowing placement in standard distribution boxes. No remote signaling contact is integrated, and there is no integrated fuse.

Mounting and Installation

Mounting is carried out in a suitable distribution box, with the protection device installed as close as possible to the supply point of the installation. Wiring is done via the designated connection terminals, ensuring that the maximum conductor cross-sections are not exceeded. The mechanical function indicator allows visual inspection of the operating status without additional measuring instruments.

Advantages in Operation

The OVR T2 3N 40-275 P QS provides reliable protection against transient overvoltages caused by switching operations or indirect lightning effects. The thermal monitoring QuickSafe® increases safety by ensuring a safe disconnection in case of overload. The optical signaling enables quick detection of malfunctions. The modular design with a replaceable protection module reduces maintenance effort and downtime in case of failure.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/614233
qrcode für ABB 2CTB803973R1100 Surge Arrester T2 3N