ABB 2CTB803973R0500, EAN: 3660308519948

ABB Automation 2CTB803973R0500 OVR T2 3N 40-275 surge protection

Energy > Surge Protection

ABB Automation 2CTB803973R0500 OVR T2 3N 40-275 surge protection

Lieske Part No. 738109
Mfg Part No 2CTB803973R0500
EAN-Code 3660308519948
Manufacturer ABB
Here only 410,40 EUR
488,38 EUR incl. VAT

Further information for ABB Automation 2CTB803973R0500 OVR T2 3N 40-275 surge protection

General
Number of conductors (without earthing)4
Nominal discharge surge current (8/20)20
Nominal voltage AC230
Short-circuit breaking capacity (Isccr)100
Max. continuous voltage AC275
Max. discharge surge current (8/20)20
Mounting methodOther
Construction size4 modular spacing
Voltage protection level1.5
Max. conductor cross section solid (solid, stranded)35
Max. conductor cross section flexible (fine-strand)25
Signalling at the deviceOptic
Degree of protection (IP)IP20
System configuration DCno
System configuration ITno
System configuration TNyes
System configuration TN-Cno
System configuration TN-C-Syes
System configuration TN-Syes
System configuration TTyes
System configuration otherno
With remote signalling contactyes
Integrated backup fuseno
Category type 2yes
The product is a surge protection device (SPD) of type OVR T2 3N 40-275 P TS QS, manufactured by ABB. It is a protective device of test class Type 2, specifically designed for use in electrical installations to protect equipment and installations from damage caused by indirect lightning effects and switching overvoltages. The device is installed as close as possible to the supply point of the installation to ensure optimal protection. It consists of a base unit and a replaceable protection module, ensuring easy maintenance and replaceability.

Applications
This device is intended for use in sub-distribution boards and final circuits. It is suitable for network configurations TT, TN-S, and TN-C-S, with a nominal voltage of AC 230 V and a maximum continuous voltage of AC 275 V. The protective device is designed for three-phase systems, supporting four conductors (without earth). The application is in electrical installations typically used in buildings with industrial or commercial use.

Functions and Equipment in Detail
The OVR T2 3N 40-275 P TS QS features a thermal monitoring system named QuickSafe®, enabling early detection of overheating. This mechanism ensures that the device is safely disconnected in case of overload or defect, preventing further damage. Additionally, a potential-free changeover contact is integrated, which can be used for external signaling or monitoring systems. Signaling on the device is optical, allowing the operating status to be visually checked. The mechanical function indicator enables quick visual verification of operational readiness.

Technology Explained Simply
The nominal discharge current is 20 kA (8/20 µs), representing the maximum energy the device can divert during an overvoltage impulse. The protection level is 1.5 kV, meaning voltages above this value are diverted to protect downstream equipment. The short-circuit withstand capability (Isccr) is 100 kA, indicating the maximum current the device can safely withstand during a short circuit in the network without failing. The device is designed for a maximum conductor cross-section of 35 mm² (rigid, single- or multi-strand) and 25 mm² (flexible, fine-stranded), enabling broad compatibility with various cable types. The mounting size is 4 TE, allowing installation in standard switchboards.

Compatibility and Accessories
The protective device is compatible with the System pro M compact series and can be mounted on phase rails. This enables modular and flexible installation in existing distributions. The mounting type is specified as other, meaning it does not fall into standard categories such as screw or clamp connections, but requires specific mounting instructions described in the technical datasheet.

Mounting and Installation
Installation typically occurs in switchboards or distributions, with mounting arranged so that the device is placed as close as possible to the supply point of the electrical installation. Connections are made via designated terminals, with maximum conductor cross-sections taken into account. The thermal monitoring QuickSafe® requires no additional measures, as it is an integral part of the device.

Advantages in Operation
The integrated thermal monitoring QuickSafe® enhances safety by automatically responding to overheating or defects. The potential-free changeover contact enables external monitoring, e.g., in alarm or maintenance systems. Optical signaling and mechanical function indicator facilitate visual inspection during operation. Compatibility with the System pro M compact series and mounting on phase rails offer flexibility for installation and expansion of distributions. The protection class IP20 ensures protection against finger contact and solid foreign objects, but not against water or dust, requiring indoor use.

Protection Rating and Environmental Conditions
The protection rating IP20 means the device is protected against finger contact and solid foreign objects. It is not waterproof or dustproof, so installation should only occur indoors.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/738109
qrcode für ABB Automation 2CTB803973R0500 OVR T2 3N 40-275 surge protection