ABB 2CTB803972R1200, EAN: 3660308519689

ABB Automation 2CTB803972R1200 OVR T2-T3 1N 20-275 P QS surge protection 230/400 V

Energy > Surge Protection

ABB Automation 2CTB803972R1200 OVR T2-T3 1N 20-275 P QS surge protection 230/400 V

Lieske Part No. 872327
Mfg Part No 2CTB803972R1200
EAN-Code 3660308519689
Manufacturer ABB
Here only 180,50 EUR
214,80 EUR incl. VAT

Further information for ABB Automation 2CTB803972R1200 OVR T2-T3 1N 20-275 P QS surge protection 230/400 V

General
Number of conductors (without earthing)2
Nominal discharge surge current (8/20)5
Nominal voltage AC400
Short-circuit breaking capacity (Isccr)100
Max. continuous voltage AC275
Max. discharge surge current (8/20)5
Mounting methodOther
Construction size2 modular spacing
Voltage protection level1.4
Max. conductor cross section solid (solid, stranded)25
Max. conductor cross section flexible (fine-strand)16
Voltage protection level L-N0.9
Voltage protection level N-PE1.4
Signalling at the deviceOptic
Degree of protection (IP)IP20
System configuration DCno
System configuration ITno
System configuration TNyes
System configuration TN-Cno
System configuration TN-C-Syes
System configuration TN-Syes
System configuration TTyes
System configuration otherno
With remote signalling contactno
Integrated backup fuseno
Category type 2yes
The OVR T2-T3 1N 20-275 P QS surge protection device from ABB is a protection device for electrical low-voltage installations and end devices against dangerous overvoltages. It is an SPD (Surge Protective Device) of type class 2+3, tested according to DIN EN 61643-11 and meeting the requirements of DIN VDE 0100-443 and 534. The device is designed for single-phase networks with 230/400 V and protects the conductors 1P+N (phase and neutral conductor) against overvoltages. The QuickSafe® technology enables safe and fast mounting and maintenance, with the devices being compatible with the System pro M compact series and mountable on phase rails.

Applications
This device is designed for use in electrical low-voltage installations, particularly in networks of the TN, TN-C-S, TN-S and TT types. It protects sensitive electrical devices and installations against transient overvoltages caused by lightning strikes, switching operations or other electrical disturbances. The protection function is typically installed in distribution boards or enclosures where power is supplied to consumers.

Functions and equipment in detail
The surge protection device features an optical status indicator that visually signals the operating condition. This allows for quick verification of functionality without additional measuring instruments. The device is rated for a nominal voltage of 400 V AC and can withstand a maximum voltage of 275 V AC continuously. The nominal discharge current is 5 kA (8/20 µs), with the maximum discharge current also being 5 kA. The short-circuit withstand capability (Isccr) is 100 kA, ensuring safety in case of network faults.

Technology explained simply
The protection level of the device is 1.4 kV, with the protection level between phase and neutral conductor (L-N) at 0.9 kV. This means that the voltage transmitted to connected devices remains below these values when an overvoltage occurs. The physical size is 2 TE, enabling installation in standard switchboards. The device is designed for mounting in enclosures and has a protection rating of IP20, meaning it is protected against finger contact and solid foreign objects, but not against water or dust.

Compatibility and accessories
The SPD is compatible with the System pro M compact series and can be mounted on phase rails. This facilitates integration into existing switchgear installations. The devices are designed for use in networks of the TN, TN-C-S, TN-S and TT types, ensuring broad applicability in various electrical installations. The QuickSafe® technology supports safe mounting and maintenance.

Mounting and installation
Mounting is carried out in enclosures or distribution boards, with the device being mountable on phase rails. The maximum conductor cross-sections are 25 mm² for rigid (single- or multi-strand) conductors and 16 mm² for flexible (fine-strand) conductors. Installation must comply with the requirements of DIN VDE 0100-443 and 534, ensuring correct wiring and secure fastening.

Advantages in operation
The optical indication allows for easy status checking. The QuickSafe® technology reduces mounting time and increases safety during installation. The high short-circuit withstand capability of 100 kA ensures safe operation even under high current loads. Compliance with standards DIN EN 61643-11, DIN VDE 0100-443 and 534 guarantees reliability and safety in operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/872327
qrcode für ABB Automation 2CTB803972R1200 OVR T2-T3 1N 20-275 P QS surge protection 230/400 V