ABB 2CTB803873R2500, EAN: 3660308519832

ABB Automation 2CTB803873R2500 OVR T2 3L 40-275 P TS QS surge protection 230/400 V

Energy > Surge Protection

ABB Automation 2CTB803873R2500 OVR T2 3L 40-275 P TS QS surge protection 230/400 V

Lieske Part No. 738114
Mfg Part No 2CTB803873R2500
EAN-Code 3660308519832
Manufacturer ABB
Here only 289,75 EUR
344,80 EUR incl. VAT

Further information for ABB Automation 2CTB803873R2500 OVR T2 3L 40-275 P TS QS surge protection 230/400 V

General
Number of conductors (without earthing)3
Nominal discharge surge current (8/20)20
Nominal voltage AC230
Short-circuit breaking capacity (Isccr)100
Max. continuous voltage AC275
Max. discharge surge current (8/20)20
Mounting methodOther
Construction size3 modular spacing
Voltage protection level1.25
Max. conductor cross section solid (solid, stranded)25
Max. conductor cross section flexible (fine-strand)16
Voltage protection level L-N1.25
Voltage protection level N-PE1.25
Signalling at the deviceOptic
Degree of protection (IP)IP20
System configuration DCno
System configuration ITno
System configuration TNyes
System configuration TN-Cyes
System configuration TN-C-Sno
System configuration TN-Sno
System configuration TTno
System configuration otherno
With remote signalling contactyes
Integrated backup fuseno
Category type 2yes
The ABB surge protection device OVR T2 3L 40-275 P TS QS is a Type 2 surge arrester for low-voltage installations, specifically designed for use in electrical distributions. The device protects electrical systems against indirect lightning effects and switching surges by diverting overvoltages through a defined discharge path. It is designed for TN and TN-C network configurations and should be installed as close as possible to the supply point of the installation to maximize protective effectiveness. The unit consists of a base part and a replaceable protection module, enabling easy maintenance and replacement. The mounting size is 3 TE, allowing installation in standard distribution enclosures.

Applications
This surge arrester is primarily intended for use in sub-distributions and final circuits. It protects sensitive electrical equipment and installations connected to the low-voltage supply against transient voltage spikes. Applications include industrial, commercial, and commercial-use residential buildings where reliable power supply and protection of electrical installations are required. Compatibility with the System pro M compact series allows integrated mounting via phase rails, simplifying installation in existing distributions.

Functions and Features in Detail
The device includes a mechanical function indicator that optically signals the operating status. The TS variant is equipped with a potential-free changeover contact serving as a remote signaling contact, enabling notification in case of failure or overload of the arrester. This feature is particularly useful in monitored systems where immediate response to a protection module failure is required. The thermal monitoring QuickSafe® ensures that the arrester safely disconnects in case of overload or defect of the protection module, preventing endangerment of the installation.

Technology Explained Simply
The arrester is rated for a nominal voltage of 230 V AC and can withstand a maximum voltage of 275 V AC continuously. The nominal discharge current is 20 kA (8/20 µs), representing the maximum energy the device can safely divert. The protection level is 1.25 kV for line-to-line and line-to-earth connections, ensuring effective shielding against overvoltages. The short-circuit withstand capability (Isccr) is 100 kA, meaning the device remains intact even in the event of a short circuit in the network. The maximum conductor cross-section coverage is 25 mm² for rigid and 16 mm² for flexible conductors, enabling broad applicability in various installations. The protection rating IP20 protects against finger contact and solid foreign objects, but is not suitable for outdoor use.

Compatibility and Accessories
The OVR T2 3L 40-275 P TS QS is compatible with the System pro M compact series and can be mounted via phase rails. This enables modular expansion and integration into existing distribution systems. The use of replaceable protection modules allows flexible adaptation to different requirements and simplifies maintenance.

Mounting and Installation
Mounting is performed in standard distribution enclosures, with the 3 TE size allowing placement in typical switchboards. Installation should be as close as possible to the supply point of the electrical installation to optimize protective function. Connections are made via designated terminal clamps designed for maximum conductor cross-sections. The mechanical function indicator and remote signaling contact are already integrated and require no additional components.

Operational Advantages
Operation of the arrester is low-maintenance, as the integrated thermal monitoring QuickSafe® ensures safe disconnection in case of overload. Optical signaling and the remote signaling contact enable quick detection of failures. The modular design with replaceable protection modules reduces maintenance costs and downtime. Compatibility with System pro M compact simplifies integration into existing systems and increases flexibility in planning and execution of electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/738114
qrcode für ABB Automation 2CTB803873R2500 OVR T2 3L 40-275 P TS QS surge protection 230/400 V