ABB 2CTB803871R2400, EAN: 3660308519566

ABB Automation 2CTB803871R2400 OVR T2-T3 20-275 P QS surge protection 1P

Energy > Surge Protection

ABB Automation 2CTB803871R2400 OVR T2-T3 20-275 P QS surge protection 1P

Lieske Part No. 872319
Mfg Part No 2CTB803871R2400
EAN-Code 3660308519566
Manufacturer ABB
Here only 82,27 EUR
97,90 EUR incl. VAT

Further information for ABB Automation 2CTB803871R2400 OVR T2-T3 20-275 P QS surge protection 1P

General
Number of conductors (without earthing)1
Nominal discharge surge current (8/20)5
Nominal voltage AC400
Short-circuit breaking capacity (Isccr)100
Max. continuous voltage AC275
Max. discharge surge current (8/20)5
Mounting methodOther
Construction size1 modular spacing
Voltage protection level1
Max. conductor cross section solid (solid, stranded)25
Max. conductor cross section flexible (fine-strand)16
Voltage protection level L-N1
Signalling at the deviceOptic
Degree of protection (IP)IP20
System configuration DCno
System configuration ITno
System configuration TNno
System configuration TN-Cno
System configuration TN-C-Sno
System configuration TN-Sno
System configuration TTno
System configuration otherno
With remote signalling contactno
Integrated backup fuseno
Category type 2yes
The overvoltage protection device OVR T2-T3 20-275 P QS from ABB is a protection device for electrical low-voltage installations and end devices against dangerous overvoltages. The device is designed as an SPD Type 2+3 and complies with the requirements of DIN EN 61643-11 as well as DIN VDE 0100-443 and 534. It is specifically designed for use in low-voltage installations with a nominal voltage of 400 V AC and protects individual conductors against overvoltages.

Applications
This device is suitable for use in electrical installations with a maximum voltage of 275 V AC. It protects against transient overvoltages caused by lightning strikes or network disturbances. The protection device is suitable for use in industrial and commercial facilities as well as in residential and administrative buildings, where reliable protection for sensitive electrical equipment is required. Compatibility with the System pro M compact series enables integrated installation in existing switchgear, with devices being mountable on phase rails.

Functions and Equipment in Detail
The overvoltage protection device features optical signalling to indicate the operating status. This allows for visual inspection of the device's functionality without additional measuring instruments. The protection device is equipped with QuickSafe® technology, enabling fast and safe installation and maintenance. The nominal discharge current is 5 kA (8/20 µs), indicating the device's ability to divert a specific energy impulse without damage to itself. The protection level is 1 kV, specifying the maximum voltage that can be applied to the device without causing a breakdown. The unit is designed for a maximum conductor cross-section of 25 mm² (rigid, single- or multi-strand) and 16 mm² (flexible, fine-stranded).

Technology Explained Simply
The protection device operates on the principle of diverting overvoltages via a non-conductive state that transitions to a conductive state when overvoltage occurs. This is achieved through special semiconductor or gas discharge elements integrated within the device. The short-circuit withstand capability is 100 kA, meaning the device remains intact and retains its protective function even in the event of a short circuit in the network. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust. Therefore, the device is suitable for indoor use, but not for outdoor or damp environments.

Compatibility and Accessories
The protection device is compatible with the System pro M compact series and can be mounted on phase rails. This enables modular expansion of the switchgear and easy integration into existing systems.

Mounting and Installation
Installation is carried out in switchgear, with the size of 1 TE indicating a standard switchboard mounting configuration. Wiring is done at the designated connection terminals, with maximum conductor cross-sections to be observed. The optical signalling allows for easy verification of functionality after installation.

Advantages in Operation
The protection device provides reliable protection for electrical installations and end devices. The QuickSafe® technology enables fast and safe installation, reducing installation time. The optical signalling simplifies checking the operating status, making maintenance easier. Compatibility with the System pro M compact series allows for modular expansion of the switchgear, increasing operational flexibility. Compliance with standards DIN EN 61643-11, DIN VDE 0100-443 and 534 ensures high safety standards and reliability of the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/872319
qrcode für ABB Automation 2CTB803871R2400 OVR T2-T3 20-275 P QS surge protection 1P