The ABB surge protection device OVR T2 40-275 P QS is a protection device of type class 2 (SPD type 2) for electrical installations in the low-voltage range. It is designed to protect against overvoltages caused by indirect lightning strikes or switching operations. The device is intended for mounting in sub-distribution boards and final circuits and should be installed as close as possible to the supply point of the installation to ensure optimal protection. The unit consists of a base part and a replaceable protection module, ensuring simple maintenance and replaceability.
Applications
The OVR T2 40-275 P QS is designed for use in electrical installations with a nominal voltage of 230 V AC. The maximum continuous voltage is 275 V AC, enabling use in standard networks with 230/400 V. The protection device is designed for single-phase systems (1P), with the number of conductors (excluding earth) specified as 1. It is applied in sub-distribution boards and final circuits, where it protects against transient overvoltages caused by electrical switching operations or atmospheric discharges.
Functions and Equipment in Detail
The device features a mechanical function indicator that optically signals the operating status. This indicator allows visual inspection of functionality without additional measuring instruments. The integrated thermal monitoring QuickSafe® monitors the internal condition of the protection module and responds to overheating to prevent hazards from thermal damage. The protection device is not equipped with a remote alarm contact or an integrated fuse.
Technology Explained Simply
The protection level is 1.25 kV, meaning the device diverts overvoltages up to this value to protect connected equipment. The nominal discharge current is 20 kA (8/20 µs), representing the maximum energy the device can safely divert. The short-circuit withstand capability (Isccr) is 100 kA, indicating the device’s ability to withstand a short circuit in the network without failure. The maximum conductor cross-section is 25 mm² for rigid and 16 mm² for flexible (fine-stranded) conductors, enabling connection to various cable types.
Compatibility and Accessories
The OVR T2 series is compatible with the System pro M compact series and can be mounted via phase rails. This enables modular integration into existing distribution systems. The protection device is designed for mounting in switchboards, with a size of 1 TE. The protection rating IP20 ensures protection against finger contact and solid foreign objects, but not against water or dust. The unit is not intended for outdoor use.
Mounting and Installation
Mounting is carried out in switchboards or distribution enclosures, with the unit preferably installed as close as possible to the supply point of the electrical installation. Connections are made via the designated terminal clamps, ensuring that the maximum conductor cross-sections (25 mm² rigid, 16 mm² flexible) are not exceeded. The unit is not designed for network configurations such as TN, TT, TN-C, TN-C-S, or IT, meaning it must only be used in systems with the appropriate network configuration.
Advantages in Operation
The OVR T2 40-275 P QS provides reliable protection through the combination of mechanical function indicator and thermal monitoring QuickSafe®. The modular design allows for easy replacement of the protection module in case of failure, without needing to replace the entire device. Compatibility with the System pro M compact series facilitates integration into existing distribution systems. The IP20 protection rating and specific network configuration limit the application area, but ensure safe operation in indoor installations.