General
Number of poles (total)	2
Number of protected poles	1
Rated voltage	240
Rated insulation voltage Ui	500
Rated impulse withstand voltage Uimp	4
Rated current	6
Rated fault current	0.03
Leakage current type	A
Rated short-circuit breaking capacity acc. EN 61009	10
Rated short-circuit breaking capacity IEC 60947-2	15
Rated short-circuit breaking capacity Icn acc. EN 61009-1	10
Disconnection characteristic	Undelayed
Voltage type	AC
Frequency	Other
Release characteristic	C
Over voltage category	3
Pollution degree	2
Ambient temperature during operating	55
Width in number of modular spacings	2
Built-in depth	69
Degree of protection (IP)	IP20
Connectable conductor cross section multi-wired	16
Mounting method	DIN rail
Power loss	2.6
Concurrently switching N-neutral
With interlocking device
Anti-nuisance tripping version

Residual current circuit breakers (RCBOs) offer protection for people and property as well as protection against electrically ignited fires in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. They guarantee protection of single-phase circuits against overload and short-circuit currents, protection against sinusoidal
alternating currents and pulsating currents with a smooth DC residual current component of up to 6 mA to earth. As well as fault protection (protection against indirect contact), additional protection and fire protection.
Areas of application are mainly in commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. The DS201 MA 110V series does not have VDE approval and is specifically designed for 110 V AC to 230 V AC applications. They meet the product standards IEC 61009-1, IEC 61009-2-1.
The approvals are: CCC (CN), ABS (USA), DNV (DE), RINA (IT), RMRS (RU), Lloyd's Register (GB).
Rated switching capacity according to IEC/EN 61009 Icn = 10 kA.
RCBO DS201 MA 110V Type A is 1-pole protected (LS), 2-pole switching.