ABB 2CSR255480R1064, EAN: 8012542326212

ABB Automation 2CSR255480R1064 residual current circuit breaker 1P+N

Installation > Modular devices / equipment installation > RCD

ABB Automation 2CSR255480R1064 residual current circuit breaker 1P+N

Lieske Part No. 1592964
Mfg Part No 2CSR255480R1064
EAN-Code 8012542326212
Manufacturer ABB
Here only 247,38 EUR
294,38 EUR incl. VAT

Further information for ABB Automation 2CSR255480R1064 residual current circuit breaker 1P+N

General
Number of poles (total)2
Number of protected poles1
Rated voltage240
Rated insulation voltage Ui500
Rated impulse withstand voltage Uimp4
Rated current6
Rated fault current0.03
Leakage current typeOther
Current limiting class3
Rated short-circuit breaking capacity acc. EN 610096
Rated short-circuit breaking capacity IEC 60947-210
Rated short-circuit breaking capacity Icn acc. EN 61009-16
Disconnection characteristicOther
Surge current capacity3
Voltage typeAC
FrequencyOther
Release characteristicC
Over voltage category3
Pollution degree2
Ambient temperature during operating55
Width in number of modular spacings2
Built-in depth69
Degree of protection (IP)IP20
Connectable conductor cross section multi-wired16
Mounting methodDIN rail
Power loss2.6
Concurrently switching N-neutralyes
With interlocking deviceno
Anti-nuisance tripping versionno
Residual current circuit breakers (RCBOs) offer protection for people and property, as well as protection against electrically ignited fires in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. They guarantee protection of single-phase circuits against overload and short-circuit currents, protection against sinusoidal alternating currents and pulsating currents with a smooth DC residual current component of up to 6 mA to earth. As well as fault protection (protection against indirect contact), additional protection (with I¿n = 30 mA) and fire protection (with I¿n = 300 mA). They meet the product standards IEC/EN 61009-1 (VDE 0664-20), IEC/EN 61009-2-1 (VDE 0664-21).
Areas of application include household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the DS201 suitable for worldwide use.
Optimum compromise between safety and operational continuity thanks to the interference immunity with surge current resistance (surge current form 8/20 µs) = 3,000 A against unwanted triggering and 10 ms short-time delay.
Rated switching capacity according to IEC/EN 61009 Icn = 6 kA.
RCBO DS201 A Type A AP-R is 1-pole protected (LS), 2-pole switching.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1592964
qrcode für ABB Automation 2CSR255480R1064 residual current circuit breaker 1P+N