Further information for ABB Automation 2CSR255188R1204 FI/LS switch 1P+N
General
Number of poles (total)
2
Number of protected poles
1
Rated voltage
230
Rated insulation voltage Ui
500
Rated impulse withstand voltage Uimp
4
Rated current
20
Rated fault current
0.03
Leakage current type
A
Current limiting class
3
Rated short-circuit breaking capacity acc. EN 61009
6
Rated short-circuit breaking capacity IEC 60947-2
10
Rated short-circuit breaking capacity Icn acc. EN 61009-1
6
Disconnection characteristic
Undelayed
Voltage type
AC
Frequency
Other
Release characteristic
C
Over voltage category
3
Pollution degree
2
Ambient temperature during operating
55
Width in number of modular spacings
2
Built-in depth
69
Degree of protection (IP)
IP20
Connectable conductor cross section multi-wired
16
Mounting method
DIN rail
Power loss
5.7
Concurrently switching N-neutral
With interlocking device
Anti-nuisance tripping version
Residual current circuit breakers (RCBOs) offer protection for people and property, as well as protection against electrically ignited fires in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. They ensure protection of single-phase circuits against overload and short-circuit currents, protection against sinusoidal alternating currents and pulsating currents with a smooth DC residual current component of up to 6 mA to earth. As well as fault protection (protection against indirect contact), additional protection (with I¿n = 30 mA) and fire protection (with I¿n = 300 mA). They meet the product standards IEC/EN 61009-1, IEC/EN 61009-2-1.
The regulations according to DIN EN 45545 (fire and smoke protection standard) R22-R26 and category 1 - class A and class B according to IEC 61373 (shock and vibration resistance) make the DS201 AT suitable for use in rail vehicles.
The extensive range of accessories offers you everything you need for your installation tasks.
The approvals are: CCC (China), RCM (Australia).
Rated switching capacity according to IEC/EN 61009 Icn = 6 kA (according to industry standard IEC/EN 60947-2 Icu = 10 kA).
RCBO DS201 AT (Traction) Type A is 1-pole protected (LS), 2-pole switching.