Further information for ABB 2CSF204101R3400 RCD 4-pole 40A
General
Number of poles
4
Rated current
40
Rated impulse withstand voltage Uimp
4
Mounting method
DIN rail
Leakage current type
A
Frequency
50/60 Hz
Degree of protection (IP)
IP20
Width in number of modular spacings
4
Built-in depth
69
Ambient temperature during operating
55
Pollution degree
2
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
25
Depth of device
69
Height of device
85
RAL-number (akin)
7035
Width of device
70
Selective protection
Short-time delayed tripping
Additional equipment possible
With interlocking device
Explosion-proof
The residual current circuit breaker F204 A-40/0.3 from ABB is a 4-pole circuit breaker for installation in electrical installations. It provides protection for persons, installations, and buildings against electrical hazards, particularly in cases of indirect contact, as well as fire prevention by detecting and disconnecting fault currents. The breaker is part of the F200 series and complies with standards IEC/EN 61008-1, 61008-2-1, and 61543 (corresponding to VDE 0664-10, -11, -30), with types F200 A up to 100 A also meeting UL 1053. It is intended for use in residential, commercial, and industrial applications.
Applications
This circuit breaker is designed for use in electrical installations executed according to DIN VDE 0100-410 and DIN VDE 0100-530. It ensures protection for sinusoidal alternating currents as well as for pulsating currents with a smooth direct fault current component up to 6 mA. The protection functions include fault protection (protection against indirect contact), additional protection (at a rated residual current IΔn = 30 mA), and fire protection (at IΔn = 300 mA). The application is in individual installations, distributions, and enclosures where safe disconnection in the event of fault currents is required.
Functions and Equipment in Detail
The breaker features a rated current of 40 A and is designed for a rated residual current of 0.3 A. It is classified as residual current type A, meaning it can also detect pulsating direct fault currents. Mounting is on DIN rail, enabling standard connection in distribution boxes. The protection class IP20 ensures protection against contact with solid objects and vertical dripping water, but not against splashing water or dust. The installation depth is 69 mm, and the device dimensions are specified as 70 mm width and 85 mm height. The width in module units is 4, allowing placement in standard distribution boxes.
Technology Explained Simply
The breaker operates with a rated impulse withstand voltage of 4 kV, making it suitable for network voltages in industrial and commercial applications. The frequency is designed for 50/60 Hz, enabling use in European and international networks. The operating ambient temperature is up to 55 °C, allowing application in normal indoor environments and enclosed enclosures. The pollution degree 2 indicates suitability for environments where only minor contamination from solid dust or dirt occurs. The connectable conductor cross-sections are up to 25 mm² for both stranded and solid conductors, enabling flexible wiring. The RAL number 7035 corresponds to a gray shade commonly used in electrical installations.
Compatibility and Accessories
To extend functionality, auxiliary devices such as auxiliary switches can be integrated. Suitable accessories include, for example, the S2C-S/H6R auxiliary switch 1 changeover for LS and FI, the Si-automat S200 B+ LS S2C-H6-20R, and the LS S2C-H6-11R auxiliary switch. These components enable mechanical or electrical signal transmission and are suitable for integration into control and monitoring systems. Combination with other components of the F200 series is possible, ensuring a consistent installation system.
Mounting and Installation
Mounting is on a DIN rail, which is standard in distribution boxes. The installation width of 4 module units corresponds to the standard width for 4-pole breakers. The locking device allows secure and unambiguous positioning of the breaker in the enclosure. Installation is performed by simply hanging the device onto the rail and then connecting the conductors. The connection cross-sections of up to 25 mm² do not require special tools, although compliance with VDE regulations is required during wiring.
Advantages in Operation
The breaker provides reliable disconnection in the event of fault currents, ensuring personal and property protection. The residual current type A characteristic enables detection of pulsating direct currents, which may occur with modern electronic devices. The compatibility with accessories extends functionality for complex installations. The compliance with international standards and approval for worldwide use make the breaker suitable for projects in various countries. The low installation depth of 69 mm and standardized width facilitate placement in existing distributions.