ABB 2CSF204101R1250, EAN: 8012542783404

ABB 2CSF204101R1250 RCD 4-pole 25A

Installation > Modular devices / equipment installation > RCD

ABB 2CSF204101R1250 RCD 4-pole 25A

Lieske Part No. 388774
Mfg Part No 2CSF204101R1250
EAN-Code 8012542783404
Manufacturer ABB
Here only 133,95 EUR
159,40 EUR incl. VAT

Further information for ABB 2CSF204101R1250 RCD 4-pole 25A

General
Number of poles4
Rated current25
Rated impulse withstand voltage Uimp4
Mounting methodDIN rail
Leakage current typeA
Frequency50/60 Hz
Degree of protection (IP)IP20
Width in number of modular spacings4
Built-in depth69
Ambient temperature during operating55
Pollution degree2
Connectable conductor cross section multi-wired25
Connectable conductor cross section solid-core25
Depth of device69
Height of device85
Power loss3.9
RAL-number (akin)7035
Width of device70
Selective protectionno
Short-time delayed trippingno
Additional equipment possibleyes
With interlocking deviceyes
Explosion-proofno
The residual current circuit breaker F204 A-25/0.03 from ABB is a 4-pole protection switch for installation in electrical installations. It is designed for use in household, commercial, and industrial applications and provides protection against electrical hazards in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. The switch ensures fault protection in case of indirect contact, additional protection with a rated residual current of 30 mA, and fire protection with a rated residual current of 300 mA. It is designed for sinusoidal alternating currents and pulsating currents with a smooth direct residual current component up to 6 mA. The protection functions are secured by compliance with product standards IEC/EN 61008-1, 61008-2-1, and 61543 (corresponding to VDE 0664-10, -11, -30) as well as UL 1053 for F200 A up to 100 A.

Residual current circuit breaker (RCCB) of the F200 series from ABB are designed for use in electrical installations requiring a high protection standard. The switch is rated for a nominal current of 25 A and features a rated impulse voltage withstand of 4 kV. The frequency operating safety is 50/60 Hz. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust. The switch is designed for an ambient temperature up to 55 °C during operation. Pollution degree class 2 accounts for normal pollution that does not present special hazards. The mounting depth is 69 mm, and the device dimensions are 70 mm (width) × 85 mm (height) × 69 mm (depth). The width corresponds to 4 module units, enabling mounting on a DIN rail.

Residual current type A means that the switch can also detect and interrupt pulsating direct residual currents, which is important for installations with electronic devices. The switch is non-selective and not time-delayed, meaning it trips immediately upon detection of a residual current. The power loss is 3.9 W. The connection cross-sections for single-core and multi-core conductors are each 25 mm². The color corresponds to RAL number 7035, a gray tone commonly used in electrical installations.

Additional features can be attached to the switch, increasing flexibility during installation. An interlock device is integrated to prevent accidental operation. Mounting is done on a DIN rail, enabling standardized installation in enclosures.

Compatibility and accessories include various compatible components that extend functionality. These include the 4-pole busbar PS4/12 10 mm² for S200 F204 L1 L2 L3 N, the phase busbar PS3/9-FI for 1x F204+S200 L1 L2 L3 N L1 L2 L3 L1, the auxiliary switch LS S2C-H6-11R, the 3-phase busbar PS3/12FI for 1x F204+S200 L1 L2 L3 N removable, the Si-automat S200 B+ LS S2C-H6-20R, and the auxiliary switch S2C-S/H6R 1 changeover for LS and FI. These accessories allow application-specific adaptation of the switching system.

Mounting and installation are performed on a DIN rail, taking into account the mounting depth of 69 mm and the width of 4 module units. The interlock device supports safe handling. Compliance with the specified ambient temperature and pollution degree is important for reliable operation. The connection cross-sections of 25 mm² for single-core and multi-core conductors allow connection to corresponding cables.

Operational advantages lie in the reliability of the protection functions, compatibility with a wide range of accessories, and compliance with international standards. The integrated interlock device increases safety during operation. Compliance with standards IEC/EN 61008-1, 61008-2-1, and 61543 as well as UL 1053 ensures worldwide usability. Protection class IP20 and pollution degree 2 are suitable for indoor environments where no special environmental conditions exist.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/388774
qrcode für ABB 2CSF204101R1250 RCD 4-pole 25A