General
Number of poles	2
Rated voltage	230
Rated current	40
Rated fault current	0.03
Rated insulation voltage Ui	500
Rated impulse withstand voltage Uimp	4
Mounting method	DIN rail
Leakage current type	A
Short-circuit breaking capacity (Icw)	6
Surge current capacity	0.25
Frequency	50 Hz
Degree of protection (IP)	IP40
Width in number of modular spacings	2
Built-in depth	69
Ambient temperature during operating	55
Pollution degree	2
Colour	Grey
Depth of device	69
Height of device	85
Power loss	4.5
RAL-number (akin)	7035
Width of device	35
Selective protection
Short-time delayed tripping
Additional equipment possible
With interlocking device
Explosion-proof

Residual current circuit breakers (RCCBs) offer personal and material protection as well as protection against electrically ignited fires in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. The residual current circuit breakers of the FX200 series ensure protection against sinusoidal alternating currents and pulsating currents with a smooth DC residual current component of up to 6 mA against earth. As well as fault protection (protection against indirect contact) and additional protection (with I¿n = 30 mA). They meet the product standards IEC/EN 61008-1, 61008-2-1, 61543 (VDE 0664 10, 11, 30). Their patented connection terminals with push-in technology ensure simple and safe contact and handling. Conductors of up to 25 mm² can be connected to the upper, input-side screw terminal. On the output side, the PSX phase rails can be used for cross-wiring. For possible further wiring, conductor cross-sections of up to 10 mm² can be connected directly to the device to the lower, additional screw connection terminal in protection class IP20. Numerous approvals make the FX200 suitable for use in household and commercial applications.