ABB 2CSB204101R3400, EAN: 8012542798705

ABB Automation 2CSB204101R3400 DDA204 A-40/0.3 FI block

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

ABB Automation 2CSB204101R3400 DDA204 A-40/0.3 FI block

Lieske Part No. 213598
Mfg Part No 2CSB204101R3400
EAN-Code 8012542798705
Manufacturer ABB
Here only 133,95 EUR
159,40 EUR incl. VAT

Further information for ABB Automation 2CSB204101R3400 DDA204 A-40/0.3 FI block

General
Nominal voltage400
Nominal current40
Number of poles4
Leakage current typeA
Rated insulation voltage Ui500
Rated impulse withstand voltage Uimp4
Connectable conductor cross section multi-wired16
Degree of protection (IP)IP2X
Pollution degree2
Ambient temperature during operating50
Power loss4.8
Rated fault current adjustableno
Delay adjustableno
Anti-nuisance tripping versionno
With interlocking deviceyes
The ABB FI module type DDA204 A-40/0.3 is a 4-pole residual current device designed for customer-side mounting with circuit breakers from the S200 and S300 series. This combination forms an FI/LS combination (RCBO), ensuring personal and property protection as well as fire protection in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. The device is designed for use in household, commercial, and industrial applications and protects circuits with 1P+N, 2P, 3P, 3P+N, or 4P operation against overload, short-circuit currents, and fault currents in sinusoidal alternating currents and pulsating currents with a smooth direct fault current component up to 6 mA. Protection is provided through fault protection (protection against indirect contact), additional protection with a rated residual current of 30 mA, and fire protection with 300 mA. The product standard IEC/EN 61009 Annex G is fulfilled.

Applications
This device is suitable for use in electrical installations in household, commercial, and industrial applications. It is used in switchgear where a combination of residual current and load protection is required, particularly in installations that must comply with the mentioned VDE standards. FI/LS combinations enable a compact and efficient protection solution that safeguards both people and equipment from dangerous fault currents and fires.

Functions and Equipment in Detail
The FI module DDA204 A-40/0.3 provides a fixed rated residual current of 300 mA for fire protection and 30 mA for additional protection. The delay time is not adjustable, nor is the rated residual current. The device features a locking mechanism that enables secure mounting and locking with the corresponding circuit breakers. The protection class IP2X protects against contact with fingers and larger objects, but not against water or dust. Pollution degree 2 is suitable for environments where only minor contamination occurs, such as indoor spaces with normal air pollution.

Technology Explained Simply
The rated voltage is 400 V, and the rated current is 40 A. The rated insulation voltage Ui is 500 V, and the rated impulse voltage withstand Uimp is 4 kV. These values ensure safe insulation and impulse voltage withstand for use in industrial and commercial installations. The maximum ambient temperature during operation is 50 °C. The power loss of the device is 4.8 W, which describes the thermal load during operation. The connection capacity for multi-strand conductors is up to 16 mm², enabling flexible wiring. The device is not equipped with anti-maloperation protection.

Compatibility and Accessories
The FI module is specifically designed for mounting with circuit breakers from the S200 and S300 series. The combination results in an FI/LS combination (RCBO) with a rated switching capacity of 6 kA for S200, 10 kA for S200 M, and 25 kA for S300 P. Compatible accessories include various phase bar models such as PS3/60A, PS3/39/16 ILTS-E, PS1/57-S9, PS3/12A, PS4/60/16, PS2/12/16, PS3/24H, as well as end caps such as PS-END3.1 and PS-END3, connection terminals such as AST25/15S and AST50/18U, wiring bridges such as SZ-DB 10/260 N, and shock protection caps BSK. These components enable flexible and secure installation in various switchgear configurations.

Mounting and Installation
Mounting is performed by customer-side attachment to circuit breakers from the S200 and S300 series. The locking mechanism ensures a secure and unambiguous connection. Connection cross-sections up to 16 mm² allow for flexible wiring. Installation is carried out in switchgear that must comply with VDE standards. The ambient temperature during operation must not exceed 50 °C.

Advantages in Operation
The combination of residual current and load protection in a single device reduces space requirements in the switchgear and simplifies installation. Compliance with standards DIN VDE 0100-410 and DIN VDE 0100-530 ensures reliable protection. The locking mechanism ensures secure mounting. The power loss of 4.8 W is typical during operation and moderately affects heat generation in the enclosure. Compatibility with the S200 and S300 series enables flexible use in various applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/213598
qrcode für ABB Automation 2CSB204101R3400 DDA204 A-40/0.3 FI block