General
Nominal current (In)	6
Max. current (Imax)	6
Frequency	60
Accuracy class	C
Pole type	Four conductor
Model	Measurement transformer
Tariff type	Multi-tariff
Tariff control	Internal/external
Approval	Measuring Instruments Directive
Pulse output	Electrical
Pulse type	S0
Pulse rate	9999
Type of indication	Digital
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	7
Type of interface	RS-485
Number of positions total (counter)	7
Degree of protection (IP)	IP20
Depth	65
Height	26.5
Power consumption	0.801
Width	123
Measuring type load profile
Escapement mechanism
Calibrated
EEC40 signature
With lock code

Three-phase meter for measuring a three-wire or four-wire three-phase network via a CTVT transformer connection (configurable transformer ratio for current and voltage) up to a maximum of 6 A. The following values are output via a backlit display with up to 7 digits: active energy (class 0.5) and reactive energy (class 2) for import and export, power, currents, voltages (LL, LN), frequency, cos phi, power factor and apparent power (per phase and total). Communication can take place via the integrated RS485 or via the infrared interface. The energy meter has 2 permanently configured inputs and outputs. The output can be used either as a pulse output or as an alarm output (up to 25 alarm values). The inputs are used to control the tariffs or to count external pulses. The meter also records up to 4 tariffs. The integrated clock enables time-controlled functions to be carried out. The meter is calibrated according to MID and approved according to IEC. The installation width is 7 DIN modules.