General
Nominal current (In)	80
Max. current (Imax)	80
Frequency	60
Accuracy class	B
Pole type	Single phase
Model	Direct measurement
Tariff type	Multi-tariff
Tariff control	Internal/external
Approval	Measuring Instruments Directive
Pulse output	Electrical
Pulse type	S0
Pulse rate	9999
Type of indication	Digital
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	4
Type of interface	RS-485
Number of positions total (counter)	7
Degree of protection (IP)	IP20
Depth	65
Height	26.5
Power consumption	0.807
Width	70
Measuring type load profile
Escapement mechanism
Calibrated
EEC40 signature
With lock code

AC meter for measuring single-phase networks via a direct connection for currents up to a maximum of 80 A. A backlit display shows the following values with up to seven digits: active energy (class 1) and reactive energy (class 2) for import and export, power, current, voltage (LN), frequency, cos phi, power factor and apparent power. Communication can take place via the integrated Modbus or infrared interface. The energy meter has 2 permanently configured inputs and outputs. The output can be used either as a pulse output or as an alarm output. Up to 25 alarm values can be set here. The inputs are used to control the tariffs or to count external pulses. The resettable intermediate counter enables individual intervals to be measured. The meter also records up to 4 tariffs. The integrated clock enables time-controlled functions to be carried out. Calibration according to MID and approval according to IEC. The installation width is 4 DIN modules.