General
Release characteristic	B
Number of poles (total)	3
Number of protected poles	3
Rated current	35
Rated voltage	400
Rated insulation voltage Ui	440
Rated impulse withstand voltage Uimp	4
Rated short-circuit breaking capacity Icn EN 60898 at 230 V	10
Voltage type	AC
Frequency	60
Current limiting class	3
Over voltage category	3
Pollution degree	3
Width in number of modular spacings	3
Built-in depth	69
Degree of protection (IP)	IP20
Ambient temperature during operating	70
Connectable conductor cross section multi-wired	25
Connectable conductor cross section solid-core	35
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation

The S200MT series circuit breakers are specially designed for the railway segment and protect cables and lines against overload and short circuits in accordance with DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2, hazard level R26/HL3 in accordance with DIN EN 45545 and requirement class 3 in accordance with NF F 16-101/102 (I2-F3) as well as category 1 - class A/B (mounted) in accordance with IEC 61373. Their patented connection terminal ensures simple and safe contacting and handling using a pressure plate. For better visibility when wiring, the connection opening for cables is located above the connection opening for the phase rail. The actual switch position is displayed via a viewing window, even when the switch lever is blocked. Conductor cross-sections of up to 25 mm² can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Each device is subjected to three intensive tests for quality and performance before delivery.