ABB 2CDS273337R0447, EAN: 4016779930369

ABB 2CDS273337R0447 Circuit Breaker 3P 13A

Installation > Modular devices / equipment installation > Circuit breaker

ABB 2CDS273337R0447 Circuit Breaker 3P 13A

Lieske Part No. 322524
Mfg Part No 2CDS273337R0447
EAN-Code 4016779930369
Manufacturer ABB
Here only 80,60 EUR
95,91 EUR incl. VAT

Further information for ABB 2CDS273337R0447 Circuit Breaker 3P 13A

General
Release characteristicK
Number of poles (total)3
Number of protected poles3
Rated current13
Rated voltage400
Rated insulation voltage Ui400
Rated impulse withstand voltage Uimp4
Voltage typeAC/DC
Frequency60
Current limiting class3
Over voltage category3
Pollution degree3
Width in number of modular spacings3
Built-in depth69
Degree of protection (IP)IP20
Ambient temperature during operating55
Connectable conductor cross section multi-wired25
Connectable conductor cross section solid-core35
Power loss6.9
Concurrently switching N-neutralno
Additional equipment possibleyes
Explosion-proofno
Flush-mounted installationno
The ABB circuit breaker SU203M-K13 is a line protection switch from the SU 200 M series, designed for use in electrical installations to protect cables and lines against overload and short circuit. It complies with standards DIN VDE 0100-430 and DIN VDE 0100-530, as well as construction regulations DIN VDE 0660-101 and IEC/EN60947-2. Additionally, it is certified according to UL489 and CSA 22.2 No. 5, enabling its worldwide use in various markets. The switch features a K tripping characteristic, ensuring selective disconnection in case of overloads and short circuits, and is rated for a nominal current of 13 A. The nominal voltage is 400 V, with the nominal insulation voltage Ui also being 400 V. The nominal impulse voltage withstand Uimp is 4 kV, ensuring electrical strength under transient voltage stresses.

Applications

The SU203M-K13 is intended for use in indoor electrical distributions, particularly in industrial and commercial facilities, as well as in residential and office buildings. It protects electrical lines and consumers against thermal overload and short-circuit currents. The protection class IP20 ensures protection against finger contact and solid foreign objects, but not against water or dust. The operating ambient temperature must not exceed 55 °C, covering typical indoor conditions. The overvoltage category 3 and pollution degree 3 indicate use in environments with medium to high pollution risk, such as production halls or buildings with industrial use.

Functions and Equipment in Detail

The switch features a patented connection terminal, enabling secure and easy connection. Mounting is done via a pressure plate, ensuring a reliable connection. The cable entry opening is positioned above the phase bar entry opening, simplifying wiring and improving visibility. The connection terminal allows direct fixation of conductors with a cross-section up to 35 mm² (single-strand) and 25 mm² (multi-strand), while maintaining IP20 protection for insulation. The installation depth is 69 mm, and the switch occupies 3 modular units in a modular enclosure.

Technology Explained Simply

The K tripping characteristic means that the switch trips at 1.3 times the nominal current (i.e., 16.9 A) within 1 hour, at 2 times the nominal current (26 A) within 1 minute, and reacts faster at higher currents. This ensures protection against thermal overload without unnecessary tripping due to short-term current peaks. The voltage type AC/DC and frequency of 60 Hz indicate use in alternating and direct current systems, with the frequency specification pointing to applications in regions with 60 Hz mains voltage (e.g., USA, Japan). The power loss is 6.9 W, describing the thermal load on the device during operation.

Compatibility and Accessories

Additional functions can be extended with optional accessories. Suitable accessories include the modular terminals CMS-102PS and CMS-101PS, as well as the load current release S2C-A1U with a voltage range of 12 to 60 V, certified according to UL489. These components can be used to extend switching functions or integrate into larger control systems. Combining these accessories allows flexible adaptation to specific installation requirements.

Mounting and Installation

The switch is designed for modular mounting and can be installed in standard distribution boxes with appropriate modular width. Flush mounting is not intended. Installation is done by fitting into a suitable distribution structure, with the connection terminal directly connected to the conductors. The connection terminal is designed to ensure a secure and durable connection without requiring additional tools or aids.

Operational Advantages

The SU203M-K13 provides reliable protection for electrical lines and consumers. The combination of international approvals (UL489, CSA 22.2 No. 5, IEC/EN60947-2) enables worldwide use. The patented connection terminal and clear arrangement of connection openings simplify installation and maintenance. The IP20 protection class and specified operating conditions make it suitable for indoor use, with the maximum ambient temperature of 55 °C defining the operational limit. The power loss of 6.9 W is within the typical range compared to other switches on the market.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/322524
qrcode für ABB 2CDS273337R0447 Circuit Breaker 3P 13A