General
Release characteristic	K
Number of poles (total)	2
Number of protected poles	2
Rated current	32
Rated voltage	440
Rated insulation voltage Ui	400
Rated impulse withstand voltage Uimp	4
Voltage type	AC/DC
Frequency	60
Current limiting class	3
Over voltage category	3
Pollution degree	3
Width in number of modular spacings	2
Built-in depth	69
Degree of protection (IP)	IP20
Ambient temperature during operating	55
Connectable conductor cross section multi-wired	25
Connectable conductor cross section solid-core	35
Power loss	7.4
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation

The circuit breakers in the SU 200 M series protect cables and lines against overload and short circuits in accordance with DIN VDE 0100-430 and DIN VDE 0100-530. They comply with the construction regulations DIN VDE 0660-101 or IEC/EN60947-2 and UL489 or CSA 22.2 No. 5. Their patented connection terminal ensures simple and safe contact and handling using a pressure plate. For better visibility when wiring, the connection opening for lines is above the connection opening for the phase bus. Conductor cross-sections of up to 35 mm² can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. The combination of approvals in accordance with UL489, CSA 22.2 No. 5 and IEC/EN60947-2 make this device a worldwide applicable device for high demands and is subjected to three intensive tests for quality and performance before delivery.