Further information for ABB 2CDS251001R0217 Fuse Switch 1A 1-pole
General
Release characteristic
K
Number of poles (total)
1
Number of protected poles
1
Rated current
1
Rated insulation voltage Ui
440
Rated impulse withstand voltage Uimp
4
Rated short-circuit breaking capacity Icn EN 60898 at 230 V
6
Voltage type
AC/DC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
3
Width in number of modular spacings
1
Built-in depth
69
Degree of protection (IP)
IP20
Ambient temperature during operating
55
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
1.25
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The S201-K1 circuit breaker from ABB is a 1-pole fuse switch of the S 200 series, designed for use in electrical installations to protect cables and lines against overload and short circuit. It complies with standards DIN VDE 0100-430 and DIN VDE 0100-530, as well as construction regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN 60947-2, and UL1077. The device is intended for use in System Compact and offers a compact design with a width of one module unit, making it ideal for row mounting in enclosures.
Applications
The S201-K1 is intended for use in electrical installations indoors, particularly in distribution enclosures and switchgear. It protects lines with a rated current of 1 A and is designed for a rated insulation voltage of 440 V. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust. The maximum ambient temperature during operation is 55 °C, enabling use in standard indoor installations.
Functions and Equipment in Detail
The switch features a patented connection terminal that enables simple and secure connection. The terminal is operated via a pressure plate, which speeds up installation and ensures a reliable connection. The connection opening for lines is located above the connection opening for the phase bar, simplifying wiring and improving visibility. Direct connections to conductor cross-sections up to 35 mm² (single-strand) and 25 mm² (multi-strand) are possible, with the terminal equipped with insulation to protection class IP20.
Technology Explained Simply
The K tripping characteristic ensures selective disconnection in case of overloads, with the switch tripping after a defined time at current values exceeding the rated current. The rated impulse voltage withstand is 4 kV, increasing reliability during transient voltage surges. The rated switching capacity Icn is 6 kA at 230 V, describing the switch’s ability to safely interrupt a short-circuit current. Energy limitation class 3 and overvoltage category 3 indicate high safety during transient voltage surges. The frequency specification of 60 Hz refers to the operating frequency for which the device is designed.
Compatibility and Accessories
The S201-K1 is designed for use in System Compact and can be combined with various accessories to optimize installation. These include busbars such as PS3/6, PS3/9, and PS3/12 with end cap, as well as row terminals CMS-102PS and CMS-101PS. Additionally, a three-phase set 710SPM with 10 mm² cross-section and a length of 1056 mm is available, as well as a cut-to-length 3-phase busbar with 10 mm² cross-section and 60 modules. These components enable flexible and secure connections within the enclosure.
Mounting and Installation
The switch is designed for installation in enclosures and does not require recessed mounting. The installation depth is 69 mm, which must be considered when planning the enclosure space. Mounting is done via the integrated connection terminal, enabling direct connection to lines and busbars. The power loss is 1.25 W, which should be considered in the thermal planning of the enclosure environment.
Advantages in Operation
The S201-K1 offers reliable protection with high operational safety. The patented connection terminal reduces installation time and improves contact quality. Compliance with international standards such as IEC/EN 60898-1 and UL1077 enables worldwide use. Each device is intensively tested three times for quality and performance before delivery, ensuring high product reliability. Compatibility with various accessories from System Compact expands application possibilities in different installation scenarios.