| General |
| Device fitting | Miniature circuit breaker (MCB) |
| Number of contacts as normally open contact | 2 |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as change-over contact | 0 |
| Number of fault-signal switches | 0 |
| Function | Auxiliary switch |
The product is an auxiliary switch from manufacturer ABB, type S2C-H6-20R, specifically designed for right-side mounting on circuit breakers. It provides visual indication of the contact position of the main device, enabling monitoring of the switch's operational status within electrical installations. This function is particularly important in industrial and commercial applications, where quick and reliable status checks are required without direct access to the device.
Auxiliary switch are electrical auxiliary devices mounted on main devices such as circuit breakers to indicate their switching status at other points in the system. The S2C-H6-20R is designed for
right-side mounting, meaning it is installed on the right side of the circuit breaker. The indication is achieved via a mechanically coupled switch that transmits the position of the main contact (on or off).
Functions and equipment in detail
The auxiliary switch features two contacts configured as
closers. This means the contact is closed when the main device is in the on" position and remains open when "off. No normally open (NO) or changeover contacts are present. The number of fault signal switches is zero, indicating that the switch does not provide additional fault indication or signaling. Its primary function is strictly status indication.
Technology explained simply
The mechanical coupling between the circuit breaker and the auxiliary switch ensures that the movement of the main contact is directly transmitted to the auxiliary switch. This makes the switching position of the main device visible at a separate point in the enclosure or control unit. This technology enables remote monitoring, for example in control systems, where the switch position can be evaluated via a relay or control logic. The use of closer contacts is typical for applications where a signal should only be activated in the on state.
Compatibility and accessories
The auxiliary switch S2C-H6-20R is intended for use with circuit breakers from the ABB Si-automat series S200 B+ LS. It is specifically designed for right-side mounting and requires no additional adapters or mounting accessories. Compatibility is limited to the specified device series; information on further compatible models or accessories is not available.
Mounting and installation
Installation is performed by direct mounting on the right side of the circuit breaker. The mechanical connection is established via an integrated coupling mechanism that transmits the movement of the main contact. The electrical connection is made through the contacts of the auxiliary switch, which are integrated into the control or indication circuit. No additional tools or mounting aids are required, as the mounting is done using standardized fastening elements.
Advantages in operation
Installing an auxiliary switch enables efficient status monitoring of circuit breakers, especially in complex enclosures or automated systems. Visual indication of the switching position reduces the need for physical inspections and supports troubleshooting. The use of closer contacts provides clear signal logic, which is easily interpretable in control and monitoring systems. The reliability of the mechanical coupling ensures precise and stable signal transmission.