ABB 2CDS200922R0001, EAN: 4016779563819

ABB 2CDS200922R0001 Auxiliary Switch 1 Changeover

Installation > Modular devices / equipment installation > Circuit breaker

ABB 2CDS200922R0001 Auxiliary Switch 1 Changeover

Lieske Part No. 725715
Mfg Part No 2CDS200922R0001
EAN-Code 4016779563819
Manufacturer ABB
Here only 32,77 EUR
39,00 EUR incl. VAT

Further information for ABB 2CDS200922R0001 Auxiliary Switch 1 Changeover

General
Device fittingMiniature circuit breaker (MCB)
Number of contacts as normally open contact0
Number of contacts as normally closed contact0
Number of contacts as change-over contact1
Number of fault-signal switches0
FunctionAuxiliary switch
The ABB auxiliary switch type S2C-S/H6R, manufacturer's number 2CDS200922R0001, is a signal contact for right-side mounting on various switching devices. It is used to monitor the switching position of the main contacts and enables the indication of a tripping event of the protective switch due to faults. The function of the auxiliary switch is used to display the operating status of the connected device in a higher-level control or monitoring system. This is particularly relevant in installations with automated fault detection or in safety and alarm systems.

Applications

The auxiliary switch is intended for use with circuit breakers, residual current circuit breakers of the F200 series (up to 100 A), FI/LS combinations DS200 (consisting of DDA200 and S200), and switch disconnectors SD200. It is used in electrical distributions where visual or electrical feedback on the status of the switch is required. This includes, for example, industrial installations, building automation systems, or safety systems, in which the tripping of the switch must trigger a reaction in the control system.

Functions and Equipment in Detail

The S2C-S/H6R features an auxiliary switch function with a changeover contact. This means that it switches an electrical contact, which is either closed or open depending on the switching position of the main device. This function enables the status of the protective switch (on or tripped) to be transmitted to an external system. The indication is achieved via electrical connection, which can, for example, activate a warning light, alarm system, or SCADA control. The number of contacts is limited to one changeover, with no additional make contacts, break contacts, or fault signal switches available.

Technology Explained Simply

The auxiliary switch operates mechanically in conjunction with the main device. When the circuit breaker or residual current switch is operated, the internal lever of the auxiliary switch moves and actuates the changeover contact. This contact can be used in a control circuit to, for example, activate a status indicator. The function is independent of the main device’s power supply, as the auxiliary switch operates purely mechanically. The tripping of the protective switch due to overcurrent, short circuit, or earth fault current is signaled via the changeover contact, enabling an external response.

Compatibility and Accessories

The auxiliary switch is specifically designed for the mentioned ABB devices: circuit breakers, residual current circuit breakers F200 (up to 100 A), FI/LS combinations DS200 (DDA200 + S200), and switch disconnectors SD200. It is designed for right-side mounting, meaning it is mounted on the right side of the main device. Installation is direct onto the device, without additional brackets or adapters.

Mounting and Installation

Installation is performed by mechanical fastening to the designated device. The auxiliary switch is mounted on the right side of the protective switch, with the exact mounting instructions corresponding to the respective main device. No additional tools or components are required. The electrical connection is made via the contacts of the changeover, which are integrated into the control circuit. Wiring is carried out according to the requirements of the respective application system.

Advantages in Operation

Integrating the auxiliary switch enables continuous monitoring of the switching status. This improves operational safety, as failures or tripping events can be immediately detected and documented. In automated systems, this reduces response time to faults and supports maintenance, as the status of the switch can be queried at any time. The mechanical design ensures reliable operation without dependence on electrical power in the auxiliary switch itself.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/725715
qrcode für ABB 2CDS200922R0001 Auxiliary Switch 1 Changeover