Further information for ABB Automation 2CDL240114R1048 PS4/48NHA phase bar
General
Number of phases
4
Number of poles
48
Suitable for number of devices
12
Pitch dimensions
17.5
Cross section
10
Length
1047
Rated permanent current Iu
63
Type of electric connection
Pin
Max. rated operation voltage Ue
690
Rated short-time withstand current lcw
25
Colour
Grey
Width in number of modular spacings
60
Insulated
Suitable for devices with N-busbar
Suitable for devices with auxiliary switch
The ABB phase busbar distributor strip type PS4/48NHA is a modular component for installation in enclosures and serves for safe and economical cross-wiring of circuit breakers, residual current protective devices, and other modular installation devices. The device is designed for a number of 12 devices and features a pole count of 48, with a phase count of 4. The busbar is equipped with a connection cross-section of 10 mm², enabling a rated continuous current of 63 A. The maximum rated operating voltage is 690 V, and the rated short-time withstand current is 25 kA. The busbar is insulated and features a pin connection suitable for connecting to modular devices. The color of the busbar is gray, and it has a length of 1047 mm. The width is 60 mounting units, with a mounting pitch of 17.5 mm.
Applications
The PS4/48NHA is specifically designed for use in electrical distribution systems where multiple modular devices such as circuit breakers or residual current protective devices must be connected in parallel. It is suitable for applications in industrial and commercial electrical installations where structured and safe power distribution is required. The busbar is compatible with devices featuring a neutral conductor and with devices featuring auxiliary switches, increasing flexibility in device combinations.
Functions and Equipment in Detail
The phase busbar strip enables parallel power supply to multiple devices via a common busbar structure. The insulation of the busbar protects against contact voltage and increases operational safety. The pin connection ensures a secure and reliable electrical connection. The busbar is designed for a maximum operating voltage of 690 V, making it suitable for applications in medium-voltage networks. The rated short-time withstand current of 25 kA protects the busbar against thermal and mechanical stresses during short-circuit events.
Technology Explained Simply
The busbar is designed in a modular format, allowing flexible adaptation to different device combinations. The pole count of 48 and the number of modules of 12 allow connection of up to 12 devices. The mounting pitch of 17.5 mm corresponds to the standard for modular installation systems and ensures compatibility with common devices. The current-carrying capacity of 63 A at a cross-section of 10 mm² is sufficient for typical distribution tasks. The insulation of the busbar protects against electrical hazards and is intended for use in enclosed enclosures.
Compatibility and Accessories
The PS4/48NHA is suitable for devices with a neutral conductor and for devices with auxiliary switches, enabling broad applicability in various installation scenarios. The busbar is equipped with a pin connection compatible with the corresponding terminals of modular devices. The selection of the appropriate phase busbar strip depends on factors such as terminal type (double terminal or cage terminal), device type, and the number of modules. The busbar is designed for use in standard distribution systems.
Mounting and Installation
Mounting is carried out in an enclosure, where the busbar is inserted into the designated mounting openings. Device connections are made via the pin connections, which are connected to the terminals of the devices. The insulation of the busbar requires no additional protective measures. The busbar is designed for horizontal mounting, and its length of 1047 mm allows connection of up to 12 modules.
Operational Advantages
The PS4/48NHA provides safe and reliable power distribution for modular devices. The insulation increases operational safety, and the high short-time withstand current protects the busbar during transient overloads. The modular design allows flexible adaptation to different installation scenarios. Compatibility with devices featuring a neutral conductor and auxiliary switches expands application possibilities. The gray color and standardized width of 60 mounting units ensure a uniform appearance in the enclosure.