ABB 2CDL240110R1012, EAN: 4016779656061

ABB Automation 2CDL240110R1012 PS4/12A phase bar

Installation > Distributor Cabinets > Meter Cabinets

ABB Automation 2CDL240110R1012 PS4/12A phase bar

Lieske Part No. 208049
Mfg Part No 2CDL240110R1012
EAN-Code 4016779656061
Manufacturer ABB
Here only 26,73 EUR
31,81 EUR incl. VAT

Further information for ABB Automation 2CDL240110R1012 PS4/12A phase bar

General
Number of phases4
Number of poles12
Suitable for number of devices3
Pitch dimensions17.5
Cross section10
Length212
Rated permanent current Iu63
Type of electric connectionPin
Max. rated operation voltage Ue690
Rated short-time withstand current lcw25
ColourGrey
Width in number of modular spacings12
Insulatedyes
Suitable for devices with N-busbarno
Suitable for devices with auxiliary switchno
The ABB phase bar type PS4/12A, manufacturer's number 2CDL240110R1012, is a modular bar for safe and economical cross-wiring of circuit breakers, residual current protective devices, and other modular installation devices in meter enclosures and distributors. It is specifically designed for use in electrical distribution systems where reliable power distribution across multiple devices is required. The bar has a pole count of 12 and is designed for up to three devices, with the maximum current load defined by the connection cross-section of 10 mm² and the rated continuous current of 63 A. The bar is equipped with a pin connection ensuring a secure electrical connection and is fully insulated to ensure safe operation.

Applications

The phase bar PS4/12A is suitable for use in electrical distribution systems, particularly in meter enclosures and distributors, where multiple modular devices are connected in parallel. It is designed for installations supporting a phase count of four and enables the connection of devices each requiring their own circuit. The bar is rated for a maximum operating voltage of 690 V, making it suitable for applications in industrial and commercial environments. The rated short-time withstand current of 25 kA protects the bar against short-term current surges, such as those occurring during short-circuit events.

Functions and Equipment in Detail

The bar is finished in grey and has a length of 212 mm, corresponding to a width of 12 module units. The module spacing is 17.5 mm, matching the standard spacing for modular installation systems. The bar is specifically designed for devices without a neutral conductor, meaning it cannot be used in applications requiring neutral conductors. Similarly, it is not suitable for devices with auxiliary switches, as the construction does not allow integration of such additional components. The insulation of the bar protects against unintended electrical contact and increases operational safety.

Technology Explained Simply

The phase bar functions as a central power distribution unit, supplying multiple electrical devices through a common circuit. The connection cross-section of 10 mm² ensures sufficient current transmission capacity, adequate for most industrial and commercial applications. The rated continuous current of 63 A defines the maximum current the bar can transmit continuously without thermal overload. The rated short-time withstand current of 25 kA indicates the bar can withstand short-term current surges, such as those occurring during short circuits, without damage. The insulation protects against contact with live parts and reduces the risk of short circuits.

Compatibility and Accessories

The bar is compatible with accessories such as the BSK shock protection, which provides additional protection against unintended contact with live parts. The use of shock protection is particularly recommended in environments with heightened safety requirements. The bar is not designed for devices with neutral conductors or auxiliary switches, which must be considered during installation planning. The selection of the appropriate phase bar depends on factors such as terminal type (e.g., double terminal or cage terminal), pole count of the devices, and device type.

Mounting and Installation

Installation is carried out in standard distribution enclosures, where the bar is inserted into the designated mounting openings. Positioning depends on the number of devices to be connected and the required spacing. The bar is connected to devices via the pin connection, with insulation ensuring electrical safety. Installation does not require special tools, although careful planning of device arrangement is necessary to ensure optimal power distribution.

Operational Advantages

Using the ABB PS4/12A phase bar enables structured and safe power distribution in distribution systems. The modular design simplifies installation and maintenance, as individual devices can be easily replaced or added. Insulation and high short-time withstand current increase operational safety and reduce the risk of damage from electrical faults. The bar is designed for use in industrial and commercial installations, where reliability and safety are critical.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/208049
qrcode für ABB Automation 2CDL240110R1012 PS4/12A phase bar