ABB 2CDL240101R1012, EAN: 4016779656054

ABB 2CDL240101R1012 Busbar 4-pole 10 mm²

Installation > Distributor Cabinets > Meter Cabinets

ABB 2CDL240101R1012 Busbar 4-pole 10 mm²

Lieske Part No. 262236
Mfg Part No 2CDL240101R1012
EAN-Code 4016779656054
Manufacturer ABB
Here only 25,11 EUR
29,88 EUR incl. VAT

Further information for ABB 2CDL240101R1012 Busbar 4-pole 10 mm²

General
Number of phases4
Number of poles12
Suitable for number of devices3
Pitch dimensions17.5
Cross section10
Length212
Rated permanent current Iu63
Type of electric connectionPin
Max. rated operation voltage Ue690
Rated short-time withstand current lcw25
ColourGrey
Width in number of modular spacings12
Insulatedyes
Suitable for devices with N-busbarno
Suitable for devices with auxiliary switchno
ABB phase bars PS4/12 are designed for safe and economical cross-wiring of circuit breakers, residual current protective devices, and other modular installation devices in distribution boards and meter enclosures. With a pole count of 12 and 4 phases, they enable the supply of multiple devices within a single enclosure. The bar is rated for a maximum nominal operating voltage of 690 V and features a connection cross-section of 10 mm², ensuring a current-carrying capacity up to 63 A (rated continuous current Iu). The electrical connection is made via pin terminals, ensuring a secure and durable connection. The bar is insulated and finished in grey, making it suitable for use in standardized distribution systems. The width is 12 module units, with a module pitch of 17.5 mm, and the total length of the bar is 212 mm. The rated short-time withstand current is 25 kA, making the bar suitable for use in installations with high short-circuit currents.

Applications
The PS4/12 is specifically designed for use in distribution boards and meter enclosures, where multiple modular devices are connected to a common power supply. It is suitable for installations where up to three devices are connected, although the bar is not designed for devices with a neutral conductor or auxiliary switches. Thus, it is intended for pure phase distribution without neutral conductor or additional switching functions. The bar is used in electrical distribution systems requiring stable and secure power distribution, particularly in industrial and commercial installations.

Functions and Equipment in Detail
The phase bars PS4/12 offer a modular and flexible solution for power distribution. The 12-pole configuration allows connection of multiple devices within an enclosure, with the number of connected devices limited to a maximum of three. The bar is equipped with pin connections, ensuring a secure and mechanically stable connection. The insulation of the bar protects against contact voltage and increases operational safety. The grey color matches common standards in electrical installation and allows for uniform design of distribution boards.

Technology Explained Simply
The bar is designed for a maximum current load of 63 A, which is sufficient for many standard applications in electrical installation. The cross-section of 10 mm² ensures adequate current transmission and heat dissipation to prevent overheating. The rated short-time withstand current of 25 kA means the bar can withstand short-term current surges during short-circuit conditions without damage. The insulation protects against electrical hazards and enables safe operation in enclosed distribution enclosures. The length of 212 mm and width of 12 module units (17.5 mm per module) are compatible with standard distribution board modules.

Compatibility and Accessories
The PS4/12 is compatible with modular installation devices that do not require a neutral conductor or auxiliary switches. Suitable accessories include BSK shock protection, which can be used for additional safety during installation and maintenance. The bar is not designed for devices with auxiliary switches or neutral conductors, so such combinations are not recommended. The bar is used in combination with circuit breakers and residual current protective devices connected to the phases.

Mounting and Installation
Mounting is carried out in distribution boards or meter enclosures, where the bar is inserted into the designated mounting openings. The pin terminals allow for easy and secure connection of devices. The insulation of the bar reduces the risk of short circuits and increases safety. Installation must comply with applicable regulations for electrical installations. The bar is not intended for use with devices featuring auxiliary switches or neutral conductors, so device selection must be considered accordingly.

Operational Advantages
The PS4/12 provides reliable and safe power distribution in distribution boards. The insulation and pin connection ensure a stable connection and increase operational safety. The modular design allows flexible adaptation to different requirements. The bar is suitable for use in industrial and commercial installations where high reliability and safety are required. The maximum current-carrying capacity of 63 A and short-time withstand current of 25 kA ensure safe operation even under demanding conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/262236
qrcode für ABB 2CDL240101R1012 Busbar 4-pole 10 mm²