ABB 2CDL230002R1009, EAN: 4016779517515

ABB 2CDL230002R1009 Phase Bar PS3/9-FI

Installation > Modular devices / equipment installation > Circuit breaker

ABB 2CDL230002R1009 Phase Bar PS3/9-FI

Lieske Part No. 140885
Mfg Part No 2CDL230002R1009
EAN-Code 4016779517515
Manufacturer ABB
Here only 25,19 EUR
29,98 EUR incl. VAT

Further information for ABB 2CDL230002R1009 Phase Bar PS3/9-FI

General
Number of phases3
Number of poles9
Suitable for number of devices3
Pitch dimensions44698
Cross section10
Length158
Rated permanent current Iu63
Type of electric connectionPin
Max. rated operation voltage Ue690
Rated short-time withstand current lcw25
ColourGrey
Width in number of modular spacings9
Insulatedyes
Suitable for devices with N-busbaryes
Suitable for devices with auxiliary switchno
The ABB phase bar module PS3/9-FI is an installation device for safe and economical cross-wiring of circuit breakers, residual current protective devices, and other modular devices in electrical installations. With a pole count of 9 and a width of 9 module units, it is designed for mounting in standard installation enclosures. The bar is designed for use with devices requiring a neutral conductor (N) and enables parallel supply to up to three devices. The version with pin connection and a connection cross-section of 10 mm² ensures a stable electrical connection. The grey colouring corresponds to the standard for installation components and supports visual orientation in the enclosure.

Phase bars serve to distribute power between multiple modular devices, thereby reducing the number of required cable connections. The PS3/9-FI is specifically designed for mounting in modular installation devices and enables simultaneous supply of three devices, each with one phase (L1, L2, L3) and a neutral conductor (N). The bar is rated for an operating voltage of 690 V, making it suitable for applications in industrial and commercial electrical installations. The rated continuous current is 63 A, making it suitable for medium to high loads in operation.

Technology explained clearly – The bar features an insulated design, ensuring safe separation of electrical conductors. The rated short-time withstand current of 25 kA indicates that the device can withstand short-term current surges in the event of a fault, which is important for safety in the enclosure. The length of 158 mm and width of 9 module units correspond to common module dimensions in electrical installation enclosures. The bar is not designed for devices with auxiliary switches, which must be considered during installation planning.

Compatibility and accessories – The PS3/9-FI can be combined with suitable accessories such as the BSK shock protection to increase safety during mounting and maintenance. The shock protection prevents unintended contact with live parts during installation. The bar is suitable for devices requiring a neutral conductor, making it appropriate for use in single-phase and multi-phase systems with a neutral conductor. The selection of the correct phase bar depends on factors such as the terminal type (double terminal or cage terminal), the pole count of the devices, and the number of modules.

Applications – The phase bar is used in industrial, commercial, and municipal electrical installations where safe and efficient power distribution between multiple modular devices is required. It is particularly suitable for enclosures where circuit breakers, residual current protective devices, or other installation devices are mounted in series. The use of phase bars reduces the number of required cable connections and improves the clarity of the installation.

Operational advantages – The PS3/9-FI enables a compact and clear installation, as multiple devices are supplied via a common bar. The insulation of the conductors increases safety, and the high current rating ensures reliable operation even under load. The standardised dimensions simplify planning and installation in existing enclosures.

Mounting and installation – Mounting is carried out in standard installation enclosures, where the bar is inserted into the designated modules. Devices are connected via the pin terminals. During planning, note that the bar is not designed for devices with auxiliary switches. The use of shock protection (BSK) is recommended to increase safety during mounting.

Functions and equipment in detail – The bar features a stable construction with a connection cross-section of 10 mm², enabling high current loading. The rated continuous current of 63 A and short-time withstand current of 25 kA ensure reliable operation under normal and transient conditions. The insulation of the conductors minimises the risk of short circuits. The grey colouring supports visual orientation in the enclosure. The bar is designed for use in systems with an operating voltage up to 690 V.

Summary – The ABB PS3/9-FI is a robust and reliable phase bar for power distribution in modular electrical installations. It is designed for use with devices requiring a neutral conductor and enables simultaneous supply to three devices. The standard dimensions and insulation of the conductors simplify installation and increase safety. The bar is suitable for industrial and commercial applications where safe and efficient power distribution is required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/140885
qrcode für ABB 2CDL230002R1009 Phase Bar PS3/9-FI