ABB 2CDL230001R1024, EAN: 4016779556576

ABB Automation 2CDL230001R1024 PS3/24H phase bar

Installation > Distributor Cabinets > Meter Cabinets

ABB Automation 2CDL230001R1024 PS3/24H phase bar

Lieske Part No. 157982
Mfg Part No 2CDL230001R1024
EAN-Code 4016779556576
Manufacturer ABB
Here only 97,42 EUR
115,93 EUR incl. VAT

Further information for ABB Automation 2CDL230001R1024 PS3/24H phase bar

General
Number of phases3
Number of poles24
Suitable for number of devices8
Pitch dimensions44698
Cross section10
Length1028
Rated permanent current Iu63
Type of electric connectionPin
Max. rated operation voltage Ue690
Rated short-time withstand current lcw25
ColourGrey
Width in number of modular spacings60
Insulatedyes
Suitable for devices with N-busbarno
Suitable for devices with auxiliary switchyes
The ABB phase bar type PS3/24H is a modular wiring component for use in meter enclosures and distributors. It is designed for safe and economical cross-wiring of circuit breakers, residual current protective devices, and other modular installation devices. The bar is designed for an electrical connection type with pin and features an insulating sleeve that ensures safe separation of individual phases. With a pole count of 24 and a rated continuous current of 63 A, it is suitable for operation in electrical installations with a maximum operating voltage of 690 V. The bar has a length of 1028 mm and is finished in grey. The width is 60 module units, corresponding to the standard width for modular devices. The bar is designed for use with devices that have auxiliary switches, but not for devices with a neutral conductor. The maximum rated short-time withstand current is 25 kA, qualifying the bar for use in installations with corresponding short-circuit strength. The connection cross-section is 10 mm², defining the current-carrying capacity and enabling connection to suitable cables.

Applications
The phase bar PS3/24H is intended for use in electrical distribution systems, particularly in meter enclosures and distributors, where multiple modular devices are connected in parallel. It is suitable for installations where up to eight devices are connected, with the number of modules and the combination of device types to be considered during selection. The bar is suitable for devices with auxiliary switches mounted on the right and bottom, increasing flexibility during installation. The use is in installations with 3-phase systems, with the bar designed for connecting devices with a pole count of 1, 2, 3, 4, 1+N or 3+N. Selecting the correct phase bar requires consideration of the terminal type (double terminal or cage terminal) and the connection cross-sections of the devices.

Functions and Equipment in Detail
The bar features an integrated insulating sleeve that ensures safe electrical separation between individual phases. The pin connection design enables a secure and mechanically stable connection with the devices. The bar is designed for a maximum current load of 63 A, representing the rated continuous current Iu. The maximum operating voltage is 690 V, ensuring suitability for industrial and commercial installations. The rated short-time withstand current of 25 kA ensures safety during short-circuit events. The bar is not intended for devices with a neutral conductor, but for devices that have auxiliary switches. The length of 1028 mm and width of 60 module units allow mounting in standard distributor enclosures. The grey colour corresponds to the usual colour standard for electrical components in distributors.

Technology Explained Simply
The phase bar functions as a central power distribution unit that connects multiple electrical devices via a common conductor. The insulation ensures that individual phases are electrically separated, increasing safety. The pin connection type enables a firm and reliable connection that remains stable even under mechanical stress. The current-carrying capacity of 63 A means the bar can continuously transmit this current value without overheating. The short-time withstand current of 25 kA describes the maximum current the bar can withstand for a short period (1 second) without damage. Use in 3-phase systems is typical for industrial and commercial installations, where even load distribution across all phases is required.

Compatibility and Accessories
The phase bar PS3/24H is compatible with modular installation devices, particularly circuit breakers and residual current protective devices that have auxiliary switches. Use with devices featuring a neutral conductor is not intended. Suitable accessories that contribute to safe mounting and protection of the installation include the BSK shock protection. This protection prevents unintended contact with live parts and increases operational safety. Combining with other devices requires consideration of terminal types and connection cross-sections to ensure a safe and reliable connection.

Mounting and Installation
Mounting is carried out in meter enclosures or distributors, where the bar is inserted into the designated mounting openings. Fixing is done via integrated mounting points located on the bar. Device connections are made via pin connections, ensuring correct phase assignment and compliance with electrical standards. Mounting requires adherence to relevant standards, particularly VDE and DIN standards. The bar is designed for mounting in standard distributor enclosures, with the width of 60 module units matching the standard size. The length of 1028 mm allows arrangement of up to eight devices.

Operational Advantages
Using the ABB phase bar PS3/24H enables structured and safe power distribution in electrical installations. The integrated insulation and pin connection ensure a reliable and safe connection. The high short-time withstand current of 25 kA increases safety during short-circuit events. Compatibility with devices featuring auxiliary switches expands application possibilities. Standardized dimensions facilitate mounting and integration into existing distributor installations. The grey colour matches the usual colour standard and ensures uniform visual design of the installation. The bar is designed for use in 3-phase systems, making it particularly suitable for industrial and commercial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/157982
qrcode für ABB Automation 2CDL230001R1024 PS3/24H phase bar