ABB 2CDL220001R1012, EAN: 4016779556521

ABB Automation 2CDL220001R1012 PS2/12 busbar 2-phase

Installation > Distributor Cabinets > Wall, Stand, distribution systems

ABB Automation 2CDL220001R1012 PS2/12 busbar 2-phase

Lieske Part No. 347268
Mfg Part No 2CDL220001R1012
EAN-Code 4016779556521
Manufacturer ABB
Here only 13,31 EUR
15,84 EUR incl. VAT

Further information for ABB Automation 2CDL220001R1012 PS2/12 busbar 2-phase

General
Number of phases2
Number of poles12
Suitable for number of devices6
Pitch dimensions44729
Cross section10
Length214
Rated permanent current Iu63
Type of electric connectionPin
Max. rated operation voltage Ue690
Rated short-time withstand current lcw25
ColourGrey
Width in number of modular spacings12
Insulatedyes
Suitable for devices with N-busbarno
Suitable for devices with auxiliary switchno
The ABB phase bar series PS2/12 is a modular system for safe and economical cross-wiring of circuit breakers, residual current protective devices, and other modular installation devices in distribution and meter enclosures. The device is specifically designed for use in compact distributors and enables structured and reliable power distribution. The bar is designed for a number of 6 devices and features a pole count of 12, corresponding to a width of 12 module units. The version is available in grey colour, with the bar being insulated, thus providing high protection against contact and short-circuit.

Applications
PS2/12 is intended for use in electrical distributors and meter enclosures, particularly in installations requiring modular installation of circuit breakers and residual current protective devices. The bar is designed for a maximum rated operating voltage of 690 V and is therefore suitable for applications in low-voltage networks. The rated continuous current is 63 A, making the bar suitable for a wide range of standard applications in industrial and commercial electrical engineering. The rated short-time withstand current of 25 kA ensures reliability during short-term current surges.

Functions and Equipment in Detail
The phase bars PS2/12 feature a connection cross-section of 10 mm², designed for secure current transmission. Electrical connection is made via pin terminals, ensuring a firm and reliable connection. The bar is cuttable, allowing flexible adaptation to the respective distributor configuration. The length is 214 mm, with the bar in standard configuration designed for 12 modules. The bar is not suitable for devices with a neutral conductor or auxiliary switches, which must be considered during installation planning.

Technology Explained Simply
PS2/12 is a 2-phase busbar used in a distributor for power distribution between multiple modular devices. The insulation of the bar protects against unintended contact and short-circuits. The pin terminals enable a secure and mechanically stable connection, which remains intact even under mechanical stress within the distributor. The rated short-time withstand current of 25 kA ensures that the bar remains undamaged even during short-term overloads, such as those occurring during short-circuits. The maximum operating voltage of 690 V makes the bar suitable for use in industrial and commercial installations.

Compatibility and Accessories
PS2/12 is specifically designed for use with modular installation devices such as circuit breakers and residual current protective devices. Suitable accessories include BSK contact protection, which provides additional protection against unintended contact. The bar is not suitable for devices with a neutral conductor or auxiliary switches, which must be considered when selecting devices. Combination with other devices is only possible if the respective requirements for terminal type, pole count, and device type are met.

Mounting and Installation
Mounting of PS2/12 is carried out in a distributor or meter enclosure, where the bar is inserted into the designated mounting openings. The cuttable design allows individual adaptation to the respective distributor configuration. The pin terminals are connected to the corresponding supply lines, with the insulation of the bar ensuring protection against contact. Installation is typically performed by qualified personnel in the field of electrical installation.

Advantages in Operation
PS2/12 provides safe and reliable power distribution in distributors. The modular design enables flexible adaptation to different requirements. The insulation and pin terminals ensure high safety and reliability. The cuttable design increases flexibility during installation. The bar is rated for a continuous current of 63 A, making it suitable for a wide range of standard applications. The rated short-time withstand current of 25 kA ensures reliability during short-term current surges.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/347268
qrcode für ABB Automation 2CDL220001R1012 PS2/12 busbar 2-phase