ABB 2CDL200001R3001, EAN: 4016779654302

ABB 2CDL200001R3001 PS-END3 End Cap Phase Bar

Industrial Material > Enclosures / Chassis > Power distribution components

ABB 2CDL200001R3001 PS-END3 End Cap Phase Bar

Lieske Part No. 134850
Mfg Part No 2CDL200001R3001
EAN-Code 4016779654302
Manufacturer ABB
Here only 1,71 EUR
2,03 EUR incl. VAT

Further information for ABB 2CDL200001R3001 PS-END3 End Cap Phase Bar

General
Length15
ABB PS-END3 is an end cap for phase bars, specifically developed for the end covering of phase bars in enclosure construction. With manufacturer number 2CDL200001R3001, it ensures safe and orderly termination of the phase bar at its ends, providing mechanical stabilization and a neat finishing appearance. The end cap is used in electrical installations to protect the phase bar from mechanical damage and to complete the installation in accordance with VDE and DIN standards.

End cap
PS-END3 is a specially shaped cover mounted at the end of a phase bar. It prevents cables or tools from accidentally entering the open ends of the bar, enhancing safety. The end cap is made from a robust, electrically insulating material suitable for use in enclosures. Its shape fits precisely to the geometry of the phase bar, enabling clean and professional installation.

Applications
The end cap is primarily used in enclosures and distributors where phase bars are employed for cross-wiring of circuit breakers, residual current devices, and other modular installation devices. It is part of the standard equipment when installing phase bars, especially when the bar is not fully occupied by devices. Using PS-END3 is particularly important when one end of the bar remains open, ensuring safety and proper operation.

Functions and equipment in detail
PS-END3 provides a mechanical termination function for the phase bar, reducing the risk of short circuits or mechanical damage. The end cap is designed to be simply pushed onto the bar without tools or additional fastening elements. It fits standard phase bar dimensions, typically 15 mm per module. The end cap is not designed for current conduction; it serves exclusively mechanical and visual termination purposes.

Technology explained simply
The end cap is a passive component that performs no electrical function. Its main purpose is to cover the open ends of the phase bar, ensuring mechanical stability and completing the installation according to VDE and DIN standards. The material selection ensures high insulation capability and resistance to mechanical stress. The end cap is not intended for power supply or distribution; it serves solely termination and protection functions.

Compatibility and accessories
PS-END3 is specifically designed for use with ABB phase bars. It is compatible with phase bars used in electrical installations for cross-wiring of circuit breakers, residual current devices, and modular installation devices. The end cap fits standard phase bar dimensions, typically 15 mm per module. There are no specific accessories required for the end cap; it is simply pushed onto the bar.

Installation and mounting
Mounting of PS-END3 requires no tools. The end cap is simply pushed onto the free end of the phase bar until it is securely seated. No additional fastening elements or mounting aids are required. Installation is performed after the phase bar has been mounted in the enclosure and device positioning is complete. The end cap is not designed for current conduction; it serves exclusively mechanical termination purposes.

The end cap is a passive component that performs no electrical function. Its main purpose is to cover the open ends of the phase bar, ensuring mechanical stability and completing the installation according to VDE and DIN standards. The material selection ensures high insulation capability and resistance to mechanical stress. The end cap is not intended for power supply or distribution; it serves solely termination and protection functions.

Operational advantages
Using PS-END3 improves installation safety by protecting open ends of the phase bar from mechanical damage and unintended contact. The end cap ensures a neat termination appearance, meeting VDE and DIN standard requirements. It also contributes to the professional look of the installation, as the bar appears clean and properly finished. The tool-free installation reduces mounting effort and installation error risks.

Phase bar
PS-END3 is specifically designed for use with phase bars used in electrical installations for cross-wiring of circuit breakers, residual current devices, and modular installation devices. The end cap fits standard phase bar dimensions, typically 15 mm per module. The end cap is not designed for current conduction; it serves exclusively mechanical termination purposes.

Enclosure construction
The end cap is part of enclosure construction, where phase bars are used for cross-wiring of devices. PS-END3 ensures safe and orderly termination covering of the phase bar, completing the installation according to VDE and DIN standards. The end cap is not intended for power supply or distribution; it serves solely termination and protection functions.

Modular installation
PS-END3 is designed for modular installation applications, where phase bars are used for cross-wiring of circuit breakers, residual current devices, and other modular devices. The end cap fits standard phase bar dimensions, typically 15 mm per module. The end cap is not designed for current conduction; it serves exclusively mechanical termination purposes.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/134850
qrcode für ABB 2CDL200001R3001 PS-END3 End Cap Phase Bar