ABB 2CDL200001R0004, EAN: 4016779652261

ABB 2CDL200001R0004 End Cap PS-END 0 1 Pair

Installation > Distributor Cabinets > Wall, Stand, distribution systems

ABB 2CDL200001R0004 End Cap PS-END 0 1 Pair

Lieske Part No. 329342
Mfg Part No 2CDL200001R0004
EAN-Code 4016779652261
Manufacturer ABB
Here only 3,02 EUR
3,59 EUR incl. VAT

Further information for ABB 2CDL200001R0004 End Cap PS-END 0 1 Pair

General
Length6
ABB phase bar end cap PS-END 0 serves as a termination component for phase bars in the field of electrical installation technology. It is mounted at the ends of phase bars to ensure a safe and proper termination connection. The end cap is specifically designed for use with ABB phase bars and conforms to the standard dimensions of this product range. The designation PS-END 0 refers to the specific version as an end cap, supplied in pairs, with one for the left side and one for the right side.

Phase bar end cap is a component that ensures electrical insulation and mechanical protection of the open ends of a phase bar construction. The end cap prevents unintended contact with conductive parts and protects the installation from contamination or mechanical damage. It is used in distribution and meter enclosures, where modular devices such as circuit breakers, residual current devices, or other installation devices are interconnected via phase bars.

Application areas include installation in electrical distributors, particularly in wall-mounted, floor-standing, or distribution systems, where structured and safe cross-wiring is required. The end cap is used in combination with phase bars designed for connecting devices with different pole counts (1, 2, 3, 4, 1+N, 3+N). The selection of the appropriate phase bar component depends on factors such as terminal type (double terminal or cage terminal), device type, and number of modules. The end cap itself is not designed for current transmission, but serves exclusively as a termination function.

Functions and equipment in detail include mechanical fit to the phase bar construction and electrical insulation. The end cap is designed to be attached to the ends of phase bars without tools. It is supplied in a pair, consisting of one left and one right end cap, to enable termination connections at both ends of a phase bar run. Its use is independent of the length of the phase bars, as long as the end cap fits mechanically.

Technology explained simply shows that the end cap is made of a non-conductive material that ensures electrical insulation. It prevents short circuits and provides a safe termination, especially in environments where the installation is accessible from the outside. The end cap is not an electrically conductive component, but serves solely for mechanical and electrical protection. Installation is done by simply snapping or inserting it onto the ends of the phase bars.

Compatibility and accessories refers to use exclusively with ABB phase bars. The PS-END 0 end cap is designed for standard phase bar construction and conforms to the corresponding dimensions. It is not intended for other manufacturers or product ranges.

Installation and mounting is done without special tools. The end cap is simply attached to the ends of the phase bars, with the left and right variants used according to their position in the distributor. Mounting is part of the general installation process, where phase bars are inserted into the distributor and then terminated with the end caps. The end cap is not intended for power supply or distribution, but serves exclusively as a termination function.

The PS-END 0 end cap is a specific component that enhances electrical and mechanical safety in distribution systems. Its use is independent of the current rating of the phase bars, as it performs no electrical function. The end cap is a standard accessory required during installation of phase bars in electrical distributors to complete the installation in accordance with applicable standards and safety regulations. It is supplied in a pair, consisting of one left and one right end cap, to enable termination connections at both ends of a phase bar run. The end cap is not designed for current transmission, but serves exclusively as a termination function.

Operational advantages lie in easy installation, secure termination function, and avoidance of electrical hazards. The end cap ensures that the open ends of phase bars are not accessible, increasing operational safety. Its use is independent of the length of the phase bars, as long as the end cap fits mechanically. The end cap is a standard accessory required during installation of phase bars in electrical distributors to complete the installation in accordance with applicable standards and safety regulations. It is supplied in a pair, consisting of one left and one right end cap, to enable termination connections at both ends of a phase bar run. The end cap is not designed for current transmission, but serves exclusively as a termination function.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/329342
qrcode für ABB 2CDL200001R0004 End Cap PS-END 0 1 Pair