ABB 2CDG110235R0011, EAN: 4016779011525

ABB Automation 2CDG110235R0011 FCC/S1.5.2.1 FanCoilCtrl 2x PWM

ABB Automation 2CDG110235R0011 FCC/S1.5.2.1 FanCoilCtrl 2x PWM

Lieske Part No. 330348
Mfg Part No 2CDG110235R0011
EAN-Code 4016779011525
Manufacturer ABB
Here only 323,00 EUR
384,37 EUR incl. VAT

Further information for ABB Automation 2CDG110235R0011 FCC/S1.5.2.1 FanCoilCtrl 2x PWM

General
Other bus systemsOther
Mounting methodOther
Width in number of modular spacings6
Number of outputs4
Max. output current0.5
Degree of protection (IP)IP20
Number of digital inputs4
Bus system KNXyes
Bus system KNX radiono
Bus system radio frequentno
Bus system LONno
Bus system Powernetno
Radio frequent bidirectionalno
Bus connection includedyes
Bus module detachableno
Correcting variable consistentyes
Correcting variable switchingyes
Valve protection functionyes
Manual switchyes
The ABB FCC/S1.5.2.1 is a KNX-based control device for regulating Fan Coil Units or fan convectors in heating and air conditioning systems. It serves for central control and monitoring of room climate and ventilation components, integrating multiple functions into a single module. The device is part of the ABB i-bus® product series and features an integrated control logic that enables coordinated operation of various components such as valve actuators, fans, and auxiliary heaters.

Applications
This device is specifically designed for controlling Fan Coil Units used in office buildings, hotels, or apartments to regulate room temperature and air circulation. It enables control of two thermoelectric valve actuators or one motor-driven valve actuator for heating and cooling processes. Fan control is achieved via an analogue output suitable for speed regulation. A relay output with a maximum load of 16 A can switch additional components such as electric auxiliary heaters. The four digital inputs are used for monitoring room conditions, for example, via window contacts, dew point sensors, level sensors, or temperature sensors. Additionally, an analogue room control device (SAR/A or SAF/A) can be connected to the inputs to enable user interaction.

Functions and Equipment in Detail
The device features an integrated room temperature controller that directly controls the outputs to achieve the desired room temperature. Control is performed via two electronic outputs, which can be operated continuously (PWM) or switching. Another output is configured as an analogue output for fan control. The relay output allows switching of an additional load, such as an electric auxiliary heater. The four digital inputs allow connection of various sensors for monitoring room conditions. The on-site control is easy to operate and enables local setting and monitoring of functions.

Technology Explained Simply
The device operates within the KNX bus system, which represents an open communication platform for building automation. The protection rating IP20 means the device is protected against contact with fingers but is not suitable for outdoor use or in damp environments. The control size can be operated continuously or switching, enabling flexible control of actuators. The valve protection function protects the valve from damage due to incorrect operating conditions. The manual control allows manual operation of the outputs, independent of automatic control. The maximum output power is 0.5 A per output, sufficient for controlling small to medium-sized actuators.

Compatibility and Accessories
The device is compatible with the KNX standard and can be integrated into existing KNX installations. It can be used with the ABB i-bus® Tool to enable advanced diagnostic functions and improved commissioning. Suitable accessories include the TSA/K24.2 thermoelectric actuator, which can be controlled via the electronic outputs of the FCC/S1.5.2.1. Installation is carried out in a 6-module-width mounting box, enabling installation in standard distribution boxes.

Mounting and Installation
Mounting is performed in a standard distribution box with a width of 6 module units. The device is equipped with bus coupling, allowing direct connection to the KNX bus network. Bus module removal is not possible; the module is permanently integrated. Installation requires connecting the inputs and outputs to the corresponding sensors and actuators, as well as connecting to the KNX bus network. The on-site control enables simple commissioning and parameter adjustment.

Advantages in Operation
The device combines multiple functions in one module, simplifying installation and maintenance. The integrated control logic enables efficient regulation of room climate. The ability to connect various sensors and actuators offers flexible adaptation to different requirements. Using the ABB i-bus® Tool supports precise commissioning and diagnostics. The valve protection function and manual control enhance system safety and user-friendliness.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/330348
qrcode für ABB Automation 2CDG110235R0011 FCC/S1.5.2.1 FanCoilCtrl 2x PWM