General
Other bus systems	Other
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	6
Number of input channels	5
Number of inputs	5
Max. switching current	6
Max. switching power	1150
Input voltage	32
Number of output channels	3
Max. number of switching contacts	2
Rated current	5
Type of current	DC
Degree of protection (IP)	IP20
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Remote operation possible
Ethernet
Bus connection included
LED controlling
With LED indication
Local operation/hand operation
Suitable for C-load
With switch function
External signal voltage necessary
Different phases connectable

As an interface between the KNX system and a heat or cold generator. The temperature setpoint or the setpoint adjustment can be transmitted to the heat/cold generator via an analog output (0.10 V). The setpoint itself is received via KNX. The device can monitor the status of the heat/cold generator via two binary signal inputs (via potential-free contacts) and send it to the KNX bus. The device has a relay output (5 A) with which the heat/cold generator can be switched on or off. The pump of the heat/cold generator can be switched on and off with an additional relay output (5 A). The status of the pump can be monitored via 3 binary signal inputs (via potential-free contacts) and this feedback can be included in the control of the pump. The ABB i-bus tool can be used for extended diagnostic functions and improved commissioning.