ABB 2CDG110028R0011, EAN: 4016779654234

ABB Automation 2CDG110028R0011 blind actuator 4-way

Installation > Home Automation > EIB material

ABB Automation 2CDG110028R0011 blind actuator 4-way

Lieske Part No. 212590
Mfg Part No 2CDG110028R0011
EAN-Code 4016779654234
Manufacturer ABB
Here only 402,80 EUR
479,33 EUR incl. VAT

Further information for ABB Automation 2CDG110028R0011 blind actuator 4-way

General
Other bus systemsOther
Mounting methodOther
Width in number of modular spacings4
Type of currentAC
Degree of protection (IP)IP20
Min. depth of built-in installation box64.5
Bus system KNXyes
Bus system KNX radiono
Bus system radio frequentno
Bus system LONno
Bus system Powernetno
Radio frequent bidirectionalno
Bus connection includedyes
Bus module detachableno
Local operation/hand operationyes
With LED indicationyes
With switch functionno
The ABB Jalousie actuator JA/S4.SMI.1M is a 4-channel digital actuator for controlling roller shutter and blind drives within building automation systems. It is specifically designed for use in the ABB i-bus® system and enables individual control of up to four independent groups, with each group being able to include up to four SMI roller shutter or blind drives. The device is part of the KNX product range and serves as an interface between building automation and electrical drives for window and sun protection systems.

Applications

The actuator is intended for integration into intelligent building control systems, particularly in residential and office buildings where central or group-based control of blinds and roller shutters is required. It is suitable for applications where automated sun protection or heating/cooling control is desired, for example depending on lighting conditions, temperature, or time. The functions include control of movement (up/down), adjustment of louvres, and driving to pre-set positions. Status messages regarding the operating state of the drive and the blind enable monitoring of the functions.

Functions and equipment in detail

The device features an integrated LED display that visually indicates the operating status. Operation is performed directly on the device, with manual control also possible without connected EIB/KNX voltage. This ensures functionality even during power failure or system malfunctions. Control is carried out via the ABB i-bus® system, which is implemented as a KNX bus system. Communication takes place via a bus coupling, which is permanently integrated into the device and is not removable.

Technology explained simply

The actuator operates with AC power supply and is designed for mounting in standard installation switch boxes. The required minimum depth of the switch box is 64.5 mm, to ensure secure and rear-stable mounting. The protection rating IP20 means that the device is protected against contact with fingers and against solid foreign objects, but not against water or dust – it is therefore intended exclusively for indoor use. The mounting type is specified as other, indicating a specific fixation within the switch box that meets the requirements of the respective installation.

Compatibility and accessories

The actuator is specifically designed for use with SMI roller shutter and blind drives. Suitable accessories include the blind module JSB/S 1.1 REG 2TE i-bus EIB, which can be used to extend functionality or integrate into existing systems. Compatibility is limited to the ABB i-bus® system; other bus systems such as KNX radio, radio bus, LON, or Powernet are not supported.

Mounting and installation

Mounting is performed in a standard installation switch box with a width of 4 module units. The switch box must have a minimum depth of 64.5 mm to allow correct positioning and wiring. Installation is carried out indoors, as the IP20 protection rating does not permit outdoor use. Wiring is done via the KNX bus system, with the bus coupling permanently integrated into the device.

Advantages in operation

The integrated manual control allows independent operation of the blinds even in the event of building automation failure. Digital control via the ABB i-bus® system provides precise and flexible drive actuation, including functions such as driving to position and louvre adjustment. Status messages ensure transparent monitoring of the operating state, simplifying maintenance and fault diagnosis. Integration into existing KNX systems is possible without additional adapters or conversion devices, as the actuator communicates directly via the i-bus® protocol.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/212590
qrcode für ABB Automation 2CDG110028R0011 blind actuator 4-way