| General |
| Number of poles (total) | 4 |
| Number of protected poles | 3 |
| Rated voltage | 415 |
| Rated insulation voltage Ui | 500 |
| Rated impulse withstand voltage Uimp | 4 |
| Rated current | 32 |
| Rated fault current | 0.03 |
| Leakage current type | A |
| Current limiting class | 3 |
| Rated short-circuit breaking capacity acc. EN 61009 | 10 |
| Rated short-circuit breaking capacity IEC 60947-2 | 15 |
| Rated short-circuit breaking capacity Icn acc. EN 61009-1 | 10 |
| Disconnection characteristic | Undelayed |
| Surge current capacity | 3 |
| Voltage type | AC |
| Frequency | 50/60 Hz |
| Release characteristic | B |
| Over voltage category | 3 |
| Pollution degree | 2 |
| Ambient temperature during operating | 60 |
| Width in number of modular spacings | 4 |
| Built-in depth | 78 |
| Degree of protection (IP) | IP20 |
| Connectable conductor cross section multi-wired | 25 |
| Power loss | 12.6 |
FI/LS-Schalter (RCBOs) bieten Personen- und Sachschutz sowie einen Schutz vor elektrisch gezündeten Bränden gemäß DIN VDE 0100-410 und DIN VDE 0100-530. Sie gewährleisten Schutz von Einphasenstromkreisen gegen Überlast und Kurzschlussströme, Schutz bei sinusförmigen Wechselströmen und pulsierenden Strömen mit glattem Gleichfehlerstrom von bis zu 6 mA gegen Erde. Sowie Fehlerschutz (Schutz bei indirektem Berühren), zusätzlichen Schutz (mit I¿n = 30 mA) und Brandschutz (mit I¿n = 300 mA). Sie erfüllen die Produktnorm IEC/EN 61009-1 (VDE 0664-20). Die Kontaktierung erfolgt direkt über das Stecksockelsystem Smissline TP und die Aussenleiterkontaktierung kann bei einphasigen Geräten frei gewählt werden (L1, L2 oder L3)