Further information for ABB Automation OTDC400FV22 load disconnector 4p 400A
General
Colour control element
Black
Colour housing
Grey
Degree of protection (IP), front side
IP20
Depth
135
Device construction
Built-in device fixed built-in technique
Height
211
Number of auxiliary contacts as change-over contact
0
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of poles
4
Number of switches
2
Rated current
400
Rated voltage at DC
1500
Type of control element
Door coupling rotary drive
Type of electrical connection of main circuit
Bolt connection
Width
255.5
Floor mounting
Interlockable
Suitable for distribution board installation
Suitable for front mounting centre
Suitable for intermediate mounting
Version as emergency stop installation
Version as main switch
Version as maintenance-/service switch
Version as reversing switch
Version as safety switch
Voltage release optional
The ABB OTDC400FV22 is a four-pole DC switch disconnector, specifically designed for use in 1000V photovoltaic power plants in the utility sector. It is intended for the safe isolation of dual PV circuits and is rated for a nominal current of 400 A. The switch assembly is designed as a built-in device using fixed installation technology, enabling compact integration into combiner boxes and inverters, thereby improving system efficiency. The design as a maintenance/repair switch makes it suitable for use in installations where targeted disconnection is required for maintenance work. The switch features a door coupling rotary drive actuation, ensuring safe and precise operation. The housing color is gray, and the actuating element is black. The front-side protection rating is IP20, providing protection against contact with fingers and solid foreign objects, but not against water or dust. The switch is intended for installation in distributors and is not suitable for floor mounting or intermediate construction. Dimensions are 255.5 mm (width), 211 mm (height), and 135 mm (depth). The rated voltage for direct current is 1500 V, with the switch designed for use in PV systems with a nominal voltage of 1000 V. The main circuit connection is made via bolted connection. No auxiliary contacts (openers, closers, changeover contacts) are integrated. The switch is not designed as a main switch, emergency stop device, safety switch, or reversing switch. The number of poles is 4, enabling the disconnection of four conductors. Certification is in accordance with IEC 60947-1 and IEC 60947-3, confirming compliance with international standards for switching devices and switching devices for switching and protective functions.
Applications
The OTDC400FV22 is primarily intended for use in photovoltaic systems in the utility sector, particularly in 1000V systems. It is used to isolate dual PV circuits, enabling safe isolation of individual circuits during maintenance work or in case of faults. The compact design reduces space requirements in combiner boxes and inverters, making system design more efficient. Installation in distributors is intended, while mounting in central or intermediate construction is not supported.
Functions and Equipment in Detail
The switch is designed as a maintenance/repair switch, meaning it is intended for targeted disconnection during maintenance or repair work. Operation is via a door coupling rotary drive, ensuring safe and mechanically stable operation. The actuating element is black, and the housing is gray. No auxiliary contacts are integrated, so the switch is used exclusively for main circuit disconnection. The main circuit connection is via bolted connection, enabling a robust and secure connection. The IP20 protection rating protects against contact with fingers and solid foreign objects, but not against water or dust.
Technology Explained Simply
The OTDC400FV22 is a switch disconnector that can interrupt current flow in a PV system without providing protective functions such as overload or short-circuit protection. Its primary purpose is to isolate circuits to create a safe working environment during maintenance or faults. The four-pole design enables disconnection of all conductors in a 4-pole circuit. The rated voltage of 1500 V for direct current is sufficient for use in PV systems with a nominal voltage of 1000 V, as the switch is designed for operation in such systems. Certification according to IEC 60947-1 and IEC 60947-3 confirms compliance with international standards for switching devices and their functions.
Compatibility and Accessories
The switch is intended for installation in distributors and can be expanded with various accessories. Suitable accessories include, for example, plastic handles such as the OHY95J12 (yellow-red, 95 mm, lockable) or the OHB95J12 (switch handle). Other options include shafts such as the OXP12X395 (395 mm) or OXP12X535 (535 mm), which allow adjustment of the actuation length. The terminal cover OTDCS400FG1 features a snap-fit and can be used to secure the connection terminals.
Mounting and Installation
The switch is intended for installation in distributors and is mounted using fixed installation technology. Mounting is not intended for floor or intermediate construction. Dimensions (255.5 mm width, 211 mm height, 135 mm depth) are designed for installation in standard distributor constructions. The bolted connection requires appropriate tools for installation. Operation is via the door coupling rotary drive, ensuring safe operation. The IP20 protection rating requires a protected installation location, shielded from contact with foreign objects and moisture.
Operational Advantages
The OTDC400FV22 offers a compact design, reducing space requirements in combiner boxes and inverters. The four-pole design enables safe disconnection of complete circuits. Certification according to IEC 60947-1 and IEC 60947-3 ensures reliability and safety in operation. The design as a maintenance/repair switch supports PV system maintenance through targeted disconnection. The robust bolted connection technology ensures a secure and long-lasting connection in the main circuit. Use in 1000V PV systems is covered by the rated voltage of 1500 V for direct current.