ABB 1SCA134375R1001, EAN: 6417019631776

ABB Automation OTDC25U2 DC disconnect switch 2-pole 25A without handle

Installation > Securing material > D-Fuses and Accessories

ABB Automation OTDC25U2 DC disconnect switch 2-pole 25A without handle

Lieske Part No. 1284043
Mfg Part No 1SCA134375R1001
EAN-Code 6417019631776
Manufacturer ABB
Here only 195,70 EUR
232,88 EUR incl. VAT

Further information for ABB Automation OTDC25U2 DC disconnect switch 2-pole 25A without handle

General
Colour control elementBlack
Colour housingGrey
Degree of protection (IP), front sideIP20
Depth64
Device constructionBuilt-in device fixed built-in technique
Height54.8
Number of auxiliary contacts as change-over contact0
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of poles2
Number of switches1
Rated current40
Rated voltage at DC1000
Type of control elementDoor coupling rotary drive
Type of electrical connection of main circuitScrew connection
Width54.5
Floor mountingno
Interlockableno
Suitable for distribution board installationyes
Suitable for front mounting centreno
Suitable for intermediate mountingno
Version as emergency stop installationno
Version as main switchno
Version as maintenance-/service switchyes
Version as reversing switchno
Version as safety switchno
Voltage release optionalno
The ABB OTDC25U2 is a DC switch disconnector of the OTDC series, designed for industrial applications in the direct current range. It features a rated voltage of 1000 V DC and a rated current of 40 A, with switching capacity specified for current strengths from 16 A to 32 A at 600 V DC. The device is designed as a built-in unit using fixed mounting technology and is suitable for installation in distribution boxes. The design is intended for maintenance and repair switching, with no auxiliary contacts (openers, closers, changeover contacts) integrated. The operating element is designed as a door coupling rotary drive, which is black in colour. The housing is grey and complies with protection class IP20 on the front side, providing protection against contact with fingers and against solid foreign objects. Dimensions are 54.5 mm (width), 54.8 mm (height), and 64 mm (depth). The connection type in the main current circuit is via screw connection. The switch is not lockable and is not designed as an emergency stop device, safety switch, or reversing switch.

Applications

The OTDC25U2 is designed for use in industrial DC systems, particularly in applications requiring safe disconnection of the circuit during maintenance or repair work. The high rated voltage of 1000 V DC and rated current of 40 A make it suitable for medium to high power requirements. The UL approval ensures compliance with international safety standards. The construction allows use at elevated ambient temperatures, making it suitable for demanding industrial environments. The 50 % reduction in power loss contributes to efficiency and heat generation.

Functions and Equipment in Detail

The switch is designed as a 2-pole disconnect switch, with a pole count of 2. It is intended for installation in distribution boxes and cannot be used for intermediate mounting or central front mounting. Mounting is not performed as floor mounting. The device is not equipped with a voltage release. Operation is manual via the integrated operating element, which is designed as a door coupling rotary drive.

Technology Explained Simply

The switching function of the OTDC25U2 is achieved through mechanical disconnection of the circuits, ensuring safe current interruption. Protection class IP20 protects against contact with fingers and solid foreign objects, but not against water or dust. The screw connection type enables a secure and reliable connection in the main current circuit. The rated voltage of 1000 V DC and rated current of 40 A define the maximum operating conditions. The 50 % reduction in power loss leads to lower heat generation and increased operational safety.

Compatibility and Accessories

Various accessories are available for the OTDC25U2, extending its functionality. These include extension shafts such as OXS6X250 (250 mm) or OXS6X130 (130 mm), which improve accessibility of the operating element. Different handles such as OHBS2RJ (selector handle, black, IP65) or OHBS2AJ1E20 (selector handle I-O-II, IP65) can be mounted for operation. Other options include handle buttons such as OHRS2 (red, lockable) or OHBS2/1 (black, lockable). Combining these accessories expands application possibilities, particularly regarding operability, safety, and environmental conditions.

Mounting and Installation

The OTDC25U2 is intended for installation in distribution boxes and is mounted using fixed mounting technology. The dimensions (54.5 mm × 54.8 mm × 64 mm) must be considered when planning the distribution box opening. The screw connection type requires the use of screw terminals for connection to the cables. Mounting is not performed as floor mounting, and central front mounting or intermediate mounting is not possible. Installation is manual, and the use of accessories such as handles or extension shafts can facilitate operation.

Operational Advantages

The OTDC25U2 provides reliable disconnection in the DC range with high switching capacity. The UL approval ensures compliance with international safety standards. The 50 % reduction in power loss improves thermal load capacity and increases operational safety. The high flexibility through various mounting options and a wide range of accessories allows adaptation to different requirements. The construction for high ambient temperatures extends the application range in demanding industrial environments. Protection class IP20 provides sufficient protection against mechanical influences indoors.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1284043
qrcode für ABB Automation OTDC25U2 DC disconnect switch 2-pole 25A without handle