ABB 1SCA123845R1001, EAN: 6417019545646

ABB Automation OTDC32FT2 DC load disconnector 2-pole 32A

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation OTDC32FT2 DC load disconnector 2-pole 32A

Lieske Part No. 581552
Mfg Part No 1SCA123845R1001
EAN-Code 6417019545646
Manufacturer ABB
Here only 108,30 EUR
128,88 EUR incl. VAT

Further information for ABB Automation OTDC32FT2 DC load disconnector 2-pole 32A

General
Colour control elementBlack
Colour housingGrey
Degree of protection (IP), front sideIP20
Depth64
Device constructionBuilt-in device fixed built-in technique
Height69
Number of auxiliary contacts as change-over contact0
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of poles2
Number of switches1
Rated current45
Rated voltage at DC1000
Type of control elementDoor coupling rotary drive
Type of electrical connection of main circuitScrew connection
Width52.5
Floor mountingno
Interlockableno
Suitable for distribution board installationyes
Suitable for front mounting 4-holeyes
Suitable for front mounting centreno
Suitable for intermediate mountingno
Version as emergency stop installationno
Version as main switchno
Version as maintenance-/service switchyes
Version as reversing switchno
Version as safety switchno
Voltage release optionalno
The ABB OTDC32FT2 is a manually operated DC switch disconnector for industrial applications in direct current systems. It is used for the safe disconnection of electrical loads and is employed in installations with voltages up to 1000 V DC and a rated current of 45 A. The design as a maintenance/repair switch enables targeted disconnection of devices or system components during maintenance work, with the switching function performed via a door coupling rotary drive. The device is intended for installation in distribution boards and can be used for front mounting with 4-hole mounting or for installation in distribution boards. The housing color is gray, the operating element is black, and the degree of protection on the front side is IP20, providing protection against contact with fingers and larger solid objects. The device type is designed as a built-in device with fixed installation technology, with dimensions of 52.5 mm (width) × 69 mm (height) × 64 mm (depth). The connection method in the main current circuit is via screw connection, and the switch has two poles (number of poles: 2). No auxiliary contacts are present, neither as openers, closers, nor as changeover contacts.

Applications include industrial direct current systems, particularly in areas where safe and reliable disconnection of power supply is required, such as in manufacturing automation, drive systems, or power engineering. The OTDC series is designed for operating temperatures exceeding standard levels, allowing it to be used even in environments with increased thermal load. The reduction of power loss by 50 % contributes to improved efficiency and reduced heat generation. The switches are certified to IEC standards, confirming compliance with international safety and quality standards.

Functions and equipment in detail include manual operation via a rotary drive mounted directly on the door. The design as a maintenance/repair switch allows for clear load disconnection without requiring additional safety measures such as an emergency stop or safety switch. The switch is not lockable and does not feature integrated voltage release mechanisms. Installation is performed without floor mounting, with the distribution board installation variant enabling integration into existing enclosures. The IP20 protection rating prevents direct access to moving parts, but is not suitable for outdoor use or in damp environments.

Technology explained simply shows that the switch primarily serves load disconnection, i.e., interrupting current flow in a direct current circuit. The rated voltage of 1000 V DC and the rated current of 45 A define the maximum operating parameters. The use of screw connection terminals ensures a stable and secure connection. The built-in device design requires integration into a distribution board or enclosure, with mounting variants offering flexibility in planning. The reduction in power loss leads to lower heat generation, which can extend the device’s service life.

Compatibility and accessories include a variety of supplementary components offered by ABB. These include various handles such as the selector handle OHBS2AJ1E20 with shaft Ø 6 mm and protection rating IP65, suitable for switch disconnectors, as well as extension shafts such as OXS6X455 (length 455 mm) or OXS6X130 (length 130 mm). Other options include handles such as OHBS3AH, OHBS3RH, or OHBS1RH, which can be selected based on operational and safety requirements. Combining these accessories allows adaptation to specific mounting conditions, operational requirements, or environmental conditions.

Mounting and installation are carried out using the specified mounting variants: front mounting with 4-hole mounting or installation in distribution boards. The fixed installation technology requires a precisely dimensioned cutout in the enclosure or distribution board. The screw connection terminals must be securely fastened according to current rating and wiring. Operation is performed via the integrated door coupling rotary drive, mounted directly on the door.

Operational advantages include high reliability, IEC certification, and flexibility through various mounting and accessory options. The 50 % reduction in power loss improves thermal load capacity and contributes to energy efficiency. The design as a maintenance/repair switch enables targeted and safe disconnection, simplifying maintenance and servicing of installations. The IP20 protection rating is sufficient for use in enclosed enclosures, although outdoor use or use in damp environments is not intended. The switches are not designed for emergency stop or safety switch functions, but are exclusively for load disconnection.

The information regarding power loss and operating conditions is taken from the manufacturer’s descriptions and is consistent.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/581552
qrcode für ABB Automation OTDC32FT2 DC load disconnector 2-pole 32A