ABB 1SCA122968R1001, EAN: 6417019538532

ABB Automation OTM125F3M230V load switch 3-pole 125A

Industrial Material > Control devices / Pilot devices > Cam switch / power switch

ABB Automation OTM125F3M230V load switch 3-pole 125A

Lieske Part No. 324556
Mfg Part No 1SCA122968R1001
EAN-Code 6417019538532
Manufacturer ABB
Here only 1.232,15 EUR
1.466,26 EUR incl. VAT

Further information for ABB Automation OTM125F3M230V load switch 3-pole 125A

General
Number of switches1
Max. rated operation voltage Ue AC750
Rated operating voltage750
Rated permanent current Iu125
Rated permanent current at AC-23, 400 V90
Rated permanent current at AC-21, 400 V125
Rated short-time withstand current lcw2.5
Rated operation power at AC-23, 400 V45
Switching power at 400 V45
Conditioned rated short-circuit current Iq50
Number of poles3
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact0
Device constructionComplete device in housing
Colour control elementBlack
Type of control elementOther
Type of electrical connection of main circuitScrew connection
Degree of protection (IP), front sideIP20
Degree of protection (NEMA)Other
Colour housingGrey
Depth116
Height100
Material housingPlastic
Width160
Version as main switchyes
Version as maintenance-/service switchno
Version as safety switchno
Version as emergency stop installationno
Version as reversing switchno
Motor drive optionalno
Motor drive integratedno
Voltage release optionalno
Suitable for front mounting 4-holeyes
Suitable for front mounting centreno
Suitable for distribution board installationyes
Interlockableno
Floor mountingno
The ABB switch disconnector type OTM125F3M230V is a motor-operated switch for use in industrial electrical installations. It is designed as a main switch and serves to disconnect electrical loads during operation. The device features an integrated motor drive, enabling remote control, while manual operation remains possible at all times. The OTM switch series is designed for current ratings from 40 A to 2500 A and voltages up to 1000 V AC, with the present type having a rated continuous current of 125 A under AC-21 operation and 90 A under AC-23 operation. The rated operating voltage is 750 V AC, and the switching capacity at 400 V is 45 kVA. The switch is suitable for use in distributors and can be mounted on fronts with 4-hole mounting. The enclosure colour is grey, the operating element is black and made of plastic. The front-side protection rating is IP20, providing protection against contact with fingers and against solid foreign objects, but not against water or dust.

Applications

The switch disconnector OTM125F3M230V is suitable for applications requiring remote control, such as in industrial control systems, distributors, or during commissioning and maintenance of electrical installations. The combination of motor-operated drive and manual operation enables flexible use, particularly in environments where manual intervention may be necessary. The OTM switch series is available for motor operating voltages of 110 V to 240 V AC and 24 V DC, with the present type designed for 230 V AC. IEC certification ensures compliance with international safety and quality standards.

Functions and Equipment in Detail

The switch features a maintenance-free motor drive equipped with a fuse for overcurrent protection to prevent damage to the device and the installation. Operation is performed via a black-coloured operating element designed for manual use. The main circuit connection is made via screw terminals, ensuring a secure and reliable connection. The number of poles is 3, typical for three-phase applications. No auxiliary contacts (openers, closers, changeover contacts) are integrated. The device type is a complete unit in an enclosure, offering a compact and robust construction.

Technology Explained Simply

The integrated motor drive enables remote control of the switch, allowing operation without physical access to the device. This is particularly advantageous in installations that are difficult to access or where manual operation is not advisable for safety reasons. Manual operation remains available at all times, ensuring a manual switching function is available in emergencies or in case of motor drive failure. The rated short-time withstand current is 2.5 kA, and the conditional rated short-circuit current Iq is 50 kA, ensuring switching capability under short-term overloads. The IP20 protection rating protects against contact with fingers and solid foreign objects, but is not suitable for outdoor use or in damp environments.

Compatibility and Accessories

The switch is intended for installation in distributors and can be mounted on fronts with 4-hole mounting. ABB offers various accessories for the OTM series, including extension shafts, handles, auxiliary switches, and terminal covers, which can be used as needed depending on the application.

Mounting and Installation

Mounting is done via front mounting with 4-hole drilling, with device dimensions of 160 mm (width) × 100 mm (height) × 116 mm (depth). Installation requires secure fastening in the distributor or enclosure, with the screw terminals for the main circuits to be wired securely and correctly. The motor drive operating voltage is 230 V AC, which must be connected accordingly.

Advantages in Operation

The combination of motor-operated drive and manual operation provides flexibility and safety. Remote control enables efficient control of installations, while manual operation serves as a redundant function. The maintenance-free design of the motor reduces maintenance effort and increases operational reliability. IEC certification ensures compliance with international standards, facilitating use in various countries and industries. The compact design and simple wiring support quick and reliable installation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/324556
qrcode für ABB Automation OTM125F3M230V load switch 3-pole 125A