ABB 1SCA121455R1001, EAN: 6417019526102

ABB Automation OTDC25F2 DC load disconnect switch 2-pole black

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation OTDC25F2 DC load disconnect switch 2-pole black

Lieske Part No. 2095326
Mfg Part No 1SCA121455R1001
EAN-Code 6417019526102
Manufacturer ABB
Here only 98,80 EUR
117,57 EUR incl. VAT

Further information for ABB Automation OTDC25F2 DC load disconnect switch 2-pole black

General
Colour control elementBlack
Colour housingGrey
Degree of protection (IP), front sideIP20
Depth66.2
Device constructionBuilt-in device fixed built-in technique
Height89
Number of auxiliary contacts as change-over contact0
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of poles2
Number of switches1
Rated current32
Rated voltage at DC1000
Type of control elementDoor coupling rotary drive
Type of electrical connection of main circuitScrew connection
Width52.5
Floor mountingno
Interlockableyes
Suitable for distribution board installationyes
Suitable for front mounting centreno
Suitable for intermediate mountingno
Version as emergency stop installationno
Version as main switchno
Version as maintenance-/service switchyes
Version as reversing switchno
Version as safety switchno
Voltage release optionalno
ABB OTDC25F2 is a manually operated DC switch disconnector for industrial applications, offered in the OTDC series. It is designed for safe disconnection of electrical loads in DC circuits and is rated for a nominal voltage of 1000 V DC and a nominal current of 32 A. The device is designed as a built-in unit for fixed installation technology and is suitable for mounting in distributors, with no provision for front mounting or intermediate installation. The IP20 protection rating on the front side protects against contact with fingers and larger objects, but is not suitable for outdoor use or humid environments. The housing is grey painted, the operating knob is black and designed as a door coupling rotary drive, enabling clear mechanical operation. The switch has two poles and is intended for mounting in distributors, with floor mounting not supported. Dimensions are 52.5 mm (width), 89 mm (height), and 66.2 mm (depth). The main circuit connection is via screw terminals, ensuring a secure and stable connection. The switch is designed as a maintenance and repair switch, making it suitable for use during maintenance work. It does not feature auxiliary contacts, neither as openers, closers, nor changeover contacts. The locking function is present, providing additional safety during operation.

Applications
The OTDC25F2 is designed for industrial DC applications, particularly in areas where safe and reliable disconnection of power supply is required. The OTDC series is used in installations that must withstand high ambient temperatures, with the construction ensuring stable operation under these conditions. The switches are rated for voltages up to 1000 V DC and currents from 16 A to 32 A, with the OTDC25F2 reaching the 32 A value. The 50 % reduction in power loss compared to previous models results in lower heat generation and improved thermal load capacity of the device. IEC certification ensures conforming and safe switching performance, regardless of current strength, without compromising safety.

Functions and Equipment in Detail
The switch is equipped with a black lever handle operated via a door coupling rotary drive. This design enables clear and mechanically distinct operation, suitable for industrial use. The locking function ensures the switch can only be operated in specific positions, increasing safety. The screw terminals in the main circuit ensure a stable electrical connection. The design as a maintenance and repair switch makes it particularly suitable for installations requiring occasional maintenance. The IP20 protection rating prevents direct contact, but is not suitable for use in humid or dusty environments.

Technology Explained Simply
The OTDC25F2 mechanically disconnects the electrical circuit by separating the contacts. Operation is performed via the lever handle, which moves the internal mechanism through a rotary drive. The screw terminals allow for a secure connection of the wires, ensuring safe current flow. The nominal voltage of 1000 V DC and nominal current of 32 A define the maximum operating values the device can safely handle. The power loss has been reduced by 50 % compared to earlier models, reducing heat generation and increasing thermal load capacity. IEC certification confirms compliance with international safety standards.

Compatibility and Accessories
A comprehensive accessory program is available for the OTDC25F2, enabling adaptation to specific requirements. This includes various handles such as OHBS1AH (black, IP54, non-lockable) or OHBS3RH (black, IP54), as well as extension shafts like OXS6X250 (250 mm) or OXS6X455 (455 mm). Additional options include shafts with Ø 6 mm in various lengths (e.g. OXS6X57, OXS6X105) and special handles such as OHBS1RH (selector handle 0 OFF-1 ON, black, IP54) or OHRS2/1 (red handle knob, lockable with padlock D=5 mm). These accessories extend the functionality and adaptability of the switch to different operating conditions and mounting requirements.

Mounting and Installation
The OTDC25F2 is designed as a built-in unit for fixed installation technology and is intended for mounting in distributors. Installation is performed by securing it within the distributor housing, with floor mounting not supported. The dimensions (52.5 mm width, 89 mm height, 66.2 mm depth) are designed for standard distributor constructions. The screw terminals allow for a secure and easy connection of wires. The locking function can be considered during installation to ensure operational safety.

Operational Advantages
The OTDC25F2 provides reliable and safe disconnection in DC circuits with high thermal load capacity. The 50 % reduction in power loss leads to lower heat generation, increasing service life and reliability. IEC certification ensures compliance with international safety standards. The locking function and clear operation via the lever handle enhance safety during use. The accessory program allows flexible adaptation to specific requirements, expanding the range of applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2095326
qrcode für ABB Automation OTDC25F2 DC load disconnect switch 2-pole black